[PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add binding document and device tree binding
constants for Nuvoton BMC NPCM8XX reset controller.

Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx>
---
 .../bindings/reset/nuvoton,npcm-reset.txt     |  17 ++-
 .../dt-bindings/reset/nuvoton,npcm8xx-reset.h | 124 ++++++++++++++++++
 2 files changed, 139 insertions(+), 2 deletions(-)
 create mode 100644 include/dt-bindings/reset/nuvoton,npcm8xx-reset.h

diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
index cb1613092ee7..b7eb8615b68b 100644
--- a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
+++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
@@ -1,14 +1,15 @@
 Nuvoton NPCM Reset controller
 
 Required properties:
-- compatible : "nuvoton,npcm750-reset" for NPCM7XX BMC
+- compatible : "nuvoton,npcm750-reset" for Poleg NPCM7XX BMC.
+               "nuvoton,npcm845-reset" for Arbel NPCM8XX BMC.
 - reg : specifies physical base address and size of the register.
 - #reset-cells: must be set to 2
 - syscon: a phandle to access GCR registers.
 
 Optional property:
 - nuvoton,sw-reset-number - Contains the software reset number to restart the SoC.
-  NPCM7xx contain four software reset that represent numbers 1 to 4.
+  NPCM7xx and NPCM8xx contain four software reset that represent numbers 1 to 4.
 
   If 'nuvoton,sw-reset-number' is not specified software reset is disabled.
 
@@ -32,3 +33,15 @@ example:
         };
 
 The index could be found in <dt-bindings/reset/nuvoton,npcm7xx-reset.h>.
+
+Specifying reset lines connected to IP NPCM8XX modules
+======================================================
+example:
+
+        spi0: spi@..... {
+                ...
+                resets = <&rstc NPCM8XX_RESET_IPSRST2 NPCM8XX_RESET_PSPI1>;
+                ...
+        };
+
+The index could be found in <dt-bindings/reset/nuvoton,npcm8xx-reset.h>.
diff --git a/include/dt-bindings/reset/nuvoton,npcm8xx-reset.h b/include/dt-bindings/reset/nuvoton,npcm8xx-reset.h
new file mode 100644
index 000000000000..4b832a0fd1dd
--- /dev/null
+++ b/include/dt-bindings/reset/nuvoton,npcm8xx-reset.h
@@ -0,0 +1,124 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+// Copyright (c) 2022 Nuvoton Technology corporation.
+
+#ifndef _DT_BINDINGS_NPCM8XX_RESET_H
+#define _DT_BINDINGS_NPCM8XX_RESET_H
+
+#define NPCM8XX_RESET_IPSRST1		0x20
+#define NPCM8XX_RESET_IPSRST2		0x24
+#define NPCM8XX_RESET_IPSRST3		0x34
+#define NPCM8XX_RESET_IPSRST4		0x74
+
+/* Reset lines on IP1 reset module (NPCM8XX_RESET_IPSRST1) */
+#define NPCM8XX_RESET_GDMA0		3
+#define NPCM8XX_RESET_UDC1		5
+#define NPCM8XX_RESET_GMAC3		6
+#define NPCM8XX_RESET_UART_2_3		7
+#define NPCM8XX_RESET_UDC2		8
+#define NPCM8XX_RESET_PECI		9
+#define NPCM8XX_RESET_AES		10
+#define NPCM8XX_RESET_UART_0_1		11
+#define NPCM8XX_RESET_MC		12
+#define NPCM8XX_RESET_SMB2		13
+#define NPCM8XX_RESET_SMB3		14
+#define NPCM8XX_RESET_SMB4		15
+#define NPCM8XX_RESET_SMB5		16
+#define NPCM8XX_RESET_PWM_M0		18
+#define NPCM8XX_RESET_TIMER_0_4		19
+#define NPCM8XX_RESET_TIMER_5_9		20
+#define NPCM8XX_RESET_GMAC4		21
+#define NPCM8XX_RESET_UDC4		22
+#define NPCM8XX_RESET_UDC5		23
+#define NPCM8XX_RESET_UDC6		24
+#define NPCM8XX_RESET_UDC3		25
+#define NPCM8XX_RESET_ADC		27
+#define NPCM8XX_RESET_SMB6		28
+#define NPCM8XX_RESET_SMB7		29
+#define NPCM8XX_RESET_SMB0		30
+#define NPCM8XX_RESET_SMB1		31
+
+/* Reset lines on IP2 reset module (NPCM8XX_RESET_IPSRST2) */
+#define NPCM8XX_RESET_MFT0		0
+#define NPCM8XX_RESET_MFT1		1
+#define NPCM8XX_RESET_MFT2		2
+#define NPCM8XX_RESET_MFT3		3
+#define NPCM8XX_RESET_MFT4		4
+#define NPCM8XX_RESET_MFT5		5
+#define NPCM8XX_RESET_MFT6		6
+#define NPCM8XX_RESET_MFT7		7
+#define NPCM8XX_RESET_MMC		8
+#define NPCM8XX_RESET_GFX_SYS		10
+#define NPCM8XX_RESET_AHB_PCIBRG	11
+#define NPCM8XX_RESET_VDMA		12
+#define NPCM8XX_RESET_ECE		13
+#define NPCM8XX_RESET_VCD		14
+#define NPCM8XX_RESET_VIRUART1		16
+#define NPCM8XX_RESET_VIRUART2		17
+#define NPCM8XX_RESET_SIOX1		18
+#define NPCM8XX_RESET_SIOX2		19
+#define NPCM8XX_RESET_BT		20
+#define NPCM8XX_RESET_3DES		21
+#define NPCM8XX_RESET_PSPI2		23
+#define NPCM8XX_RESET_GMAC2		25
+#define NPCM8XX_RESET_USBH1		26
+#define NPCM8XX_RESET_GMAC1		28
+#define NPCM8XX_RESET_CP1		31
+
+/* Reset lines on IP3 reset module (NPCM8XX_RESET_IPSRST3) */
+#define NPCM8XX_RESET_PWM_M1		0
+#define NPCM8XX_RESET_SMB12		1
+#define NPCM8XX_RESET_SPIX		2
+#define NPCM8XX_RESET_SMB13		3
+#define NPCM8XX_RESET_UDC0		4
+#define NPCM8XX_RESET_UDC7		5
+#define NPCM8XX_RESET_UDC8		6
+#define NPCM8XX_RESET_UDC9		7
+#define NPCM8XX_RESET_USBHUB		8
+#define NPCM8XX_RESET_PCI_MAILBOX	9
+#define NPCM8XX_RESET_GDMA1		10
+#define NPCM8XX_RESET_GDMA2		11
+#define NPCM8XX_RESET_SMB14		12
+#define NPCM8XX_RESET_SHA		13
+#define NPCM8XX_RESET_SEC_ECC		14
+#define NPCM8XX_RESET_PCIE_RC		15
+#define NPCM8XX_RESET_TIMER_10_14	16
+#define NPCM8XX_RESET_RNG		17
+#define NPCM8XX_RESET_SMB15		18
+#define NPCM8XX_RESET_SMB8		19
+#define NPCM8XX_RESET_SMB9		20
+#define NPCM8XX_RESET_SMB10		21
+#define NPCM8XX_RESET_SMB11		22
+#define NPCM8XX_RESET_ESPI		23
+#define NPCM8XX_RESET_USB_PHY_1		24
+#define NPCM8XX_RESET_USB_PHY_2		25
+
+/* Reset lines on IP4 reset module (NPCM8XX_RESET_IPSRST4) */
+#define NPCM8XX_RESET_SMB16		0
+#define NPCM8XX_RESET_SMB17		1
+#define NPCM8XX_RESET_SMB18		2
+#define NPCM8XX_RESET_SMB19		3
+#define NPCM8XX_RESET_SMB20		4
+#define NPCM8XX_RESET_SMB21		5
+#define NPCM8XX_RESET_SMB22		6
+#define NPCM8XX_RESET_SMB23		7
+#define NPCM8XX_RESET_I3C0		8
+#define NPCM8XX_RESET_I3C1		9
+#define NPCM8XX_RESET_I3C2		10
+#define NPCM8XX_RESET_I3C3		11
+#define NPCM8XX_RESET_I3C4		12
+#define NPCM8XX_RESET_I3C5		13
+#define NPCM8XX_RESET_UART4		16
+#define NPCM8XX_RESET_UART5		17
+#define NPCM8XX_RESET_UART6		18
+#define NPCM8XX_RESET_PCIMBX2		19
+#define NPCM8XX_RESET_SMB24		22
+#define NPCM8XX_RESET_SMB25		23
+#define NPCM8XX_RESET_SMB26		24
+#define NPCM8XX_RESET_USBPHY3		25
+#define NPCM8XX_RESET_PCIRCPHY		27
+#define NPCM8XX_RESET_PWM_M2		28
+#define NPCM8XX_RESET_JTM1		29
+#define NPCM8XX_RESET_JTM2		30
+#define NPCM8XX_RESET_USBH2		31
+
+#endif
-- 
2.33.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux