On Fri, May 20 2022 at 10:55:24 +0200, AngeloGioacchino Del Regno
<angelogioacchino.delregno@xxxxxxxxxxxxx> wrote:
Il 19/05/22 16:22, Yassine Oudjana ha scritto:
From: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
Add reset definitions for Mediatek MT6735 resets provided by
infracfg and pericfg.
Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
MAINTAINERS | 2 ++
.../reset/mediatek,mt6735-infracfg.h | 31
+++++++++++++++++++
.../reset/mediatek,mt6735-pericfg.h | 31
+++++++++++++++++++
3 files changed, 64 insertions(+)
create mode 100644
include/dt-bindings/reset/mediatek,mt6735-infracfg.h
create mode 100644
include/dt-bindings/reset/mediatek,mt6735-pericfg.h
diff --git a/MAINTAINERS b/MAINTAINERS
index a59069263cfb..1c0af554a7b6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12503,6 +12503,8 @@
F: include/dt-bindings/clock/mediatek,mt6735-apmixedsys.h
F: include/dt-bindings/clock/mediatek,mt6735-infracfg.h
F: include/dt-bindings/clock/mediatek,mt6735-pericfg.h
F: include/dt-bindings/clock/mediatek,mt6735-topckgen.h
+F: include/dt-bindings/reset/mediatek,mt6735-infracfg.h
+F: include/dt-bindings/reset/mediatek,mt6735-pericfg.h
MEDIATEK MT76 WIRELESS LAN DRIVER
M: Felix Fietkau <nbd@xxxxxxxx>
..snip..
diff --git a/include/dt-bindings/reset/mediatek,mt6735-pericfg.h
b/include/dt-bindings/reset/mediatek,mt6735-pericfg.h
new file mode 100644
index 000000000000..6cdfaa7ddadf
--- /dev/null
+++ b/include/dt-bindings/reset/mediatek,mt6735-pericfg.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_RST_MT6735_PERICFG_H
+#define _DT_BINDINGS_RST_MT6735_PERICFG_H
+
+#define UART0_SW_RST 0
+#define UART1_SW_RST 1
+#define UART2_SW_RST 2
+#define UART3_SW_RST 3
+#define UART4_SW_RST 4
where's number 5?
+#define BTIF_SW_RST 6
+#define DISP_PWM_SW_RST 7
+#define PWM_SW_RST 8
...and where's 9?
+#define AUXADC_SW_RST 10
+#define DMA_SW_RST 11
+#define IRDA_SW_RST 12
+#define IRTX_SW_RST 13
and 14, 15?
+#define THERM_SW_RST 16
+#define MSDC2_SW_RST 17
+#define MSDC3_SW_RST 17
MSDC 2 and 3 are both 17?! :-)
+#define MSDC0_SW_RST 19
+#define MSDC1_SW_RST 20
21?
+#define I2C0_SW_RST 22
+#define I2C1_SW_RST 23
+#define I2C2_SW_RST 24
+#define I2C3_SW_RST 25
+#define USB_SW_RST 28
+
and 29-32?
+#define SPI0_SW_RST 33
+
+#endif
I have a hunch that you've misunderstood the changes in the resets...
What Rex-BC has done in his reset cleanup is exactly to stop directly
mapping these to the actual bits that we're using... so the
definitions
in there will simply be sequential, and the actual mapping is done in
your clk-mt6735-pericfg.c driver.
I did notice that, but reading the documentation in reset.h:
* @rst_idx_map:Pointer to an array containing ids if input argument is
index.
* This array is not necessary if our input argument does not mean
index.
I thought that it wasn't necessary to use it. Thinking
about it now however, I guess that was to maintain compatibility
with old device trees. I'll change it next time.
Maybe a note should be put there to avoid confusion
in the future.
Thanks,
Yassine
