On 5/4/2022 2:43 PM, Stefan Wahren wrote:
Hi,
Am 13.04.22 um 18:27 schrieb Stefan Wahren:
The commit 3d2cbb644836 ("ARM: dts: bcm2711: Move emmc2 into its own
bus")
assumed that all bootloader pass the FDT modified by the firmware to the
kernel. But this is not always the case (e.g. Fedora) and cause boot
issues for boards with a BCM2711 C0 SoC (RPi 400, CM4, newer RPi 4 B)
which does have different DMA constraints.
Since we are not able to detect the SoC revision, let's assume a BCM2711
C0 SoC for bcm2711.dtsi and move the restricted DMA constrains to a
separate RPi 4 B board file just for the old SoC revision.
Fixes: 3d2cbb644836 ("ARM: dts: bcm2711: Move emmc2 into its own bus")
Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
since there wasn't any feedback yet, i want to ping ...
Could not we just rely on the VPU patching the Device Tree instead of
having to differentiate the 2711 revision and having to use different
DTS/DTBs?
Also, can we consider that the older B0 are less predominant in the wild
than the C0 nowadays, especially with the shortages going on is that
even remotely the case?
--
Florian
