MDIO devices have #address-cells = <1>, #size-cells = <0>. Now that we
have a schema enforcing this for marvell,orion-mdio we can see that the
turris-mox has a unnecessary 2nd cell for the switch nodes reg property
of it's switch devices. Remove the unnecessary 2nd cell from the
switches reg property.
Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---
.../boot/dts/marvell/armada-3720-turris-mox.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 1cee26479bfe..98c9a3265446 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -303,7 +303,7 @@ phy1: ethernet-phy@1 {
/* switch nodes are enabled by U-Boot if modules are present */
switch0@10 {
compatible = "marvell,mv88e6190";
- reg = <0x10 0>;
+ reg = <0x10>;
dsa,member = <0 0>;
interrupt-parent = <&moxtet>;
interrupts = <MOXTET_IRQ_PERIDOT(0)>;
@@ -428,7 +428,7 @@ port-sfp@a {
switch0@2 {
compatible = "marvell,mv88e6085";
- reg = <0x2 0>;
+ reg = <0x2>;
dsa,member = <0 0>;
interrupt-parent = <&moxtet>;
interrupts = <MOXTET_IRQ_TOPAZ>;
@@ -495,7 +495,7 @@ port@5 {
switch1@11 {
compatible = "marvell,mv88e6190";
- reg = <0x11 0>;
+ reg = <0x11>;
dsa,member = <0 1>;
interrupt-parent = <&moxtet>;
interrupts = <MOXTET_IRQ_PERIDOT(1)>;
@@ -620,7 +620,7 @@ port-sfp@a {
switch1@2 {
compatible = "marvell,mv88e6085";
- reg = <0x2 0>;
+ reg = <0x2>;
dsa,member = <0 1>;
interrupt-parent = <&moxtet>;
interrupts = <MOXTET_IRQ_TOPAZ>;
@@ -687,7 +687,7 @@ port@5 {
switch2@12 {
compatible = "marvell,mv88e6190";
- reg = <0x12 0>;
+ reg = <0x12>;
dsa,member = <0 2>;
interrupt-parent = <&moxtet>;
interrupts = <MOXTET_IRQ_PERIDOT(2)>;
@@ -803,7 +803,7 @@ port-sfp@a {
switch2@2 {
compatible = "marvell,mv88e6085";
- reg = <0x2 0>;
+ reg = <0x2>;
dsa,member = <0 2>;
interrupt-parent = <&moxtet>;
interrupts = <MOXTET_IRQ_TOPAZ>;
--
2.36.1
