Add dts for ARMv7 based broadband SoC BCM63178. bcm63178.dtsi is the SoC description dts header and bcm963178.dts is a simple dts file for Broadcom BCM963178 Reference board that only enable the UART port. Signed-off-by: Anand Gore <anand.gore@xxxxxxxxxxxx> --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/bcm63178.dtsi | 118 ++++++++++++++++++++++++++++++++ arch/arm/boot/dts/bcm963178.dts | 30 ++++++++ 3 files changed, 150 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/bcm63178.dtsi create mode 100644 arch/arm/boot/dts/bcm963178.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f9f6fa4f4825..d9ac59524408 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -182,7 +182,8 @@ dtb-$(CONFIG_ARCH_BERLIN) += \ dtb-$(CONFIG_ARCH_BRCMSTB) += \ bcm7445-bcm97445svmb.dtb dtb-$(CONFIG_ARCH_BCMBCA) += \ - bcm947622.dtb + bcm947622.dtb \ + bcm963178.dtb dtb-$(CONFIG_ARCH_CLPS711X) += \ ep7211-edb7211.dtb dtb-$(CONFIG_ARCH_DAVINCI) += \ diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi new file mode 100644 index 000000000000..5463443f0762 --- /dev/null +++ b/arch/arm/boot/dts/bcm63178.dtsi @@ -0,0 +1,118 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Broadcom Ltd. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "brcm,bcm63178", "brcm,bcmbca"; + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CA7_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CA7_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + CA7_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + arm,cpu-registers-not-fw-configured; + }; + + pmu: pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&CA7_0>, <&CA7_1>, + <&CA7_2>; + }; + + clocks: clocks { + periph_clk: periph-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + uart_clk: uart-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&periph_clk>; + clock-div = <4>; + clock-mult = <1>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + cpu_off = <1>; + cpu_on = <2>; + }; + + axi@81000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x81000000 0x4000>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x2000>; + }; + }; + + bus@ff800000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff800000 0x800000>; + + uart0: serial@12000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12000 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&uart_clk>, <&uart_clk>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm963178.dts b/arch/arm/boot/dts/bcm963178.dts new file mode 100644 index 000000000000..fa096e9cde23 --- /dev/null +++ b/arch/arm/boot/dts/bcm963178.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm63178.dtsi" + +/ { + model = "Broadcom BCM963178 Reference Board"; + compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; -- 2.25.1
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature