Hi Mikhail, csharper2005@xxxxxxxxx wrote on Mon, 16 May 2022 15:12:28 +0000: > This patch series add support for Sercomm mtd partition table parser. It's > used in some Beeline, Netgear and Sercomm routers. The Sercomm partition > map table contains real partition offsets, which may differ from device to > device depending on the number and location of bad blocks on NAND. Series applied in place of the previous version on mtd/next. > > Changes since: > v4: > - Add Acked-by to the first patch > > v3: > - Fix commit message of the first patch > - Add Reviewed-by to the second patch > > v2: > - Fix mistakes in dt-binding > - Add patch for new vendor prefix > - Add vendor prefix to scpart-id property > > v1: > - Add dt-binding in a separate patch > - Remove redundant braces and logical NOT operator > - Define pr_fmt > - Replace kcalloc by kzalloc > - Use of_get_child_count() and alloc big enough array before the > for_each_child_of_node() > > Mikhail Zhilkin (3): > dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix > dt-bindings: mtd: partitions: Extend fixed-partitions binding > mtd: parsers: add support for Sercomm partitions > > .../mtd/partitions/fixed-partitions.yaml | 55 +++- > .../devicetree/bindings/vendor-prefixes.yaml | 2 + > drivers/mtd/parsers/Kconfig | 9 + > drivers/mtd/parsers/Makefile | 1 + > drivers/mtd/parsers/scpart.c | 240 ++++++++++++++++++ > 5 files changed, 305 insertions(+), 2 deletions(-) > create mode 100644 drivers/mtd/parsers/scpart.c > Thanks, Miquèl
