This patch series add support for Sercomm mtd partition table parser. It's used in some Beeline, Netgear and Sercomm routers. The Sercomm partition map table contains real partition offsets, which may differ from device to device depending on the number and location of bad blocks on NAND. Changes since: v4: - Add Acked-by to the first patch v3: - Fix commit message of the first patch - Add Reviewed-by to the second patch v2: - Fix mistakes in dt-binding - Add patch for new vendor prefix - Add vendor prefix to scpart-id property v1: - Add dt-binding in a separate patch - Remove redundant braces and logical NOT operator - Define pr_fmt - Replace kcalloc by kzalloc - Use of_get_child_count() and alloc big enough array before the for_each_child_of_node() Mikhail Zhilkin (3): dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix dt-bindings: mtd: partitions: Extend fixed-partitions binding mtd: parsers: add support for Sercomm partitions .../mtd/partitions/fixed-partitions.yaml | 55 +++- .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/mtd/parsers/Kconfig | 9 + drivers/mtd/parsers/Makefile | 1 + drivers/mtd/parsers/scpart.c | 240 ++++++++++++++++++ 5 files changed, 305 insertions(+), 2 deletions(-) create mode 100644 drivers/mtd/parsers/scpart.c -- 2.25.1
