On 16.05.22 13:58, Max Krummenacher wrote:
> From: Max Krummenacher <max.krummenacher@xxxxxxxxxxx>
>
> The STMPE MFD device binding requires the child node to have a fixed
> name, i.e. with '_', not '-'. Otherwise the stmpe_adc, stmpe_touchscreen
> drivers will not be probed.
IMO, the Linux driver should be fixed and the requirement to use a fixed
node name be dropped from the binding. The driver itself already probes
by compatible, the node name seems only to be used by the MFD driver to
detect which functions to enable. It could do the same by checking for
compatibles. Otherwise you invite a game of cat and mouse, where in
future, this is changed back again reintroducing the regression..
> Fixes: 56086b5e804f ("ARM: dts: imx6qdl-apalis: Avoid underscore in node name")
> Signed-off-by: Max Krummenacher <max.krummenacher@xxxxxxxxxxx>
Anyway, as a fix, this looks ok for now:
Reviewed-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
Cheers,
Ahmad
> ---
>
> arch/arm/boot/dts/imx6qdl-apalis.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> index bd763bae596b..da919d0544a8 100644
> --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
> @@ -315,7 +315,7 @@
> /* ADC conversion time: 80 clocks */
> st,sample-time = <4>;
>
> - stmpe_touchscreen: stmpe-touchscreen {
> + stmpe_touchscreen: stmpe_touchscreen {
> compatible = "st,stmpe-ts";
> /* 8 sample average control */
> st,ave-ctrl = <3>;
> @@ -332,7 +332,7 @@
> st,touch-det-delay = <5>;
> };
>
> - stmpe_adc: stmpe-adc {
> + stmpe_adc: stmpe_adc {
> compatible = "st,stmpe-adc";
> /* forbid to use ADC channels 3-0 (touch) */
> st,norequest-mask = <0x0F>;
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
