The built-in PPE engine has a dedicated clock for the EIP-197 crypto
engine.
So, since the required clock currently missing add support for it.
Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
---
drivers/clk/qcom/gcc-ipq8074.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/clk/qcom/gcc-ipq8074.c b/drivers/clk/qcom/gcc-ipq8074.c
index f1017f2e61bd..c964e43ba68a 100644
--- a/drivers/clk/qcom/gcc-ipq8074.c
+++ b/drivers/clk/qcom/gcc-ipq8074.c
@@ -3182,6 +3182,24 @@ static struct clk_branch gcc_nss_ptp_ref_clk = {
},
};
+static struct clk_branch gcc_crypto_ppe_clk = {
+ .halt_reg = 0x68310,
+ .halt_bit = 31,
+ .clkr = {
+ .enable_reg = 0x68310,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_crypto_ppe_clk",
+ .parent_names = (const char *[]){
+ "nss_ppe_clk_src"
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_nssnoc_ce_apb_clk = {
.halt_reg = 0x6830c,
.clkr = {
@@ -4644,6 +4662,7 @@ static struct clk_regmap *gcc_ipq8074_clks[] = {
[GCC_PCIE0_RCHNG_CLK_SRC] = &pcie0_rchng_clk_src.clkr,
[GCC_PCIE0_RCHNG_CLK] = &gcc_pcie0_rchng_clk.clkr,
[GCC_PCIE0_AXI_S_BRIDGE_CLK] = &gcc_pcie0_axi_s_bridge_clk.clkr,
+ [GCC_CRYPTO_PPE_CLK] = &gcc_crypto_ppe_clk.clkr,
};
static const struct qcom_reset_map gcc_ipq8074_resets[] = {
--
2.36.1
