[PATCH 2/6] regulator: qcom_spmi: add support for HT_P150

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



HT_P150 is a LDO PMOS regulator based on LV P150 using HFS430 layout
found in PMP8074 and PMS405 PMIC-s.

Both PMP8074 and PMS405 define the programmable range as 1.616V to 3.304V
but the actual MAX output voltage depends on the exact LDO in each of
the PMIC-s.

It has a max current of 150mA, voltage step of 8mV.

Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
---
 drivers/regulator/qcom_spmi-regulator.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 02bfce981150..38bbc70241ae 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -164,6 +164,7 @@ enum spmi_regulator_subtype {
 	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL3	= 0x0f,
 	SPMI_REGULATOR_SUBTYPE_ULT_HF_CTL4	= 0x10,
 	SPMI_REGULATOR_SUBTYPE_HFS430		= 0x0a,
+	SPMI_REGULATOR_SUBTYPE_HT_P150		= 0x35,
 };
 
 enum spmi_common_regulator_registers {
@@ -544,6 +545,10 @@ static struct spmi_voltage_range hfs430_ranges[] = {
 	SPMI_VOLTAGE_RANGE(0, 320000, 320000, 2040000, 2040000, 8000),
 };
 
+static struct spmi_voltage_range ht_p150_ranges[] = {
+	SPMI_VOLTAGE_RANGE(0, 1616000, 1616000, 3304000, 3304000, 8000),
+};
+
 static DEFINE_SPMI_SET_POINTS(pldo);
 static DEFINE_SPMI_SET_POINTS(nldo1);
 static DEFINE_SPMI_SET_POINTS(nldo2);
@@ -564,6 +569,7 @@ static DEFINE_SPMI_SET_POINTS(nldo660);
 static DEFINE_SPMI_SET_POINTS(ht_lvpldo);
 static DEFINE_SPMI_SET_POINTS(ht_nldo);
 static DEFINE_SPMI_SET_POINTS(hfs430);
+static DEFINE_SPMI_SET_POINTS(ht_p150);
 
 static inline int spmi_vreg_read(struct spmi_regulator *vreg, u16 addr, u8 *buf,
 				 int len)
@@ -1458,6 +1464,7 @@ static const struct regulator_ops spmi_hfs430_ops = {
 
 static const struct spmi_regulator_mapping supported_regulators[] = {
 	/*           type subtype dig_min dig_max ltype ops setpoints hpm_min */
+	SPMI_VREG(LDO,   HT_P150,  0, INF, HFS430, hfs430, ht_p150, 10000),
 	SPMI_VREG(BUCK,  GP_CTL,   0, INF, SMPS,   smps,   smps,   100000),
 	SPMI_VREG(BUCK,  HFS430,   0, INF, HFS430, hfs430, hfs430,  10000),
 	SPMI_VREG(LDO,   N300,     0, INF, LDO,    ldo,    nldo1,   10000),
-- 
2.36.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux