On 2022-05-14 22:01:34, Dmitry Baryshkov wrote:
> Replace numeric values with the symbolic names defined in the bindings
> header.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Reviewed-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sdm630.dtsi | 23 ++++++++++++-----------
> 1 file changed, 12 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> index 6d0bc9e8fb5b..44f048934fc6 100644
> --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> @@ -8,6 +8,7 @@
> #include <dt-bindings/clock/qcom,gpucc-sdm660.h>
> #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
> #include <dt-bindings/clock/qcom,rpmcc.h>
> +#include <dt-bindings/interconnect/qcom,sdm660.h>
> #include <dt-bindings/power/qcom-rpmpd.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -1045,7 +1046,7 @@ adreno_gpu: gpu@5000000 {
> nvmem-cells = <&gpu_speed_bin>;
> nvmem-cell-names = "speed_bin";
>
> - interconnects = <&bimc 1 &bimc 5>;
> + interconnects = <&bimc MASTER_OXILI &bimc SLAVE_EBI>;
> interconnect-names = "gfx-mem";
>
> operating-points-v2 = <&gpu_sdm630_opp_table>;
> @@ -1299,8 +1300,8 @@ sdhc_2: sdhci@c084000 {
> <&xo_board>;
> clock-names = "core", "iface", "xo";
>
> - interconnects = <&a2noc 3 &a2noc 10>,
> - <&gnoc 0 &cnoc 28>;
> + interconnects = <&a2noc MASTER_SDCC_2 &a2noc SLAVE_A2NOC_SNOC>,
> + <&gnoc MASTER_APSS_PROC &cnoc SLAVE_SDCC_2>;
> operating-points-v2 = <&sdhc2_opp_table>;
>
> pinctrl-names = "default", "sleep";
> @@ -1351,8 +1352,8 @@ sdhc_1: sdhci@c0c4000 {
> <&gcc GCC_SDCC1_ICE_CORE_CLK>;
> clock-names = "core", "iface", "xo", "ice";
>
> - interconnects = <&a2noc 2 &a2noc 10>,
> - <&gnoc 0 &cnoc 27>;
> + interconnects = <&a2noc MASTER_SDCC_1 &a2noc SLAVE_A2NOC_SNOC>,
> + <&gnoc MASTER_APSS_PROC &cnoc SLAVE_SDCC_1>;
> interconnect-names = "sdhc1-ddr", "cpu-sdhc1";
> operating-points-v2 = <&sdhc1_opp_table>;
> pinctrl-names = "default", "sleep";
> @@ -1525,9 +1526,9 @@ mdp: mdp@c901000 {
> "core",
> "vsync";
>
> - interconnects = <&mnoc 2 &bimc 5>,
> - <&mnoc 3 &bimc 5>,
> - <&gnoc 0 &mnoc 17>;
> + interconnects = <&mnoc MASTER_MDP_P0 &bimc SLAVE_EBI>,
> + <&mnoc MASTER_MDP_P1 &bimc SLAVE_EBI>,
> + <&gnoc MASTER_APSS_PROC &mnoc SLAVE_DISPLAY_CFG>;
> interconnect-names = "mdp0-mem",
> "mdp1-mem",
> "rotator-mem";
> @@ -2034,7 +2035,7 @@ camss: camss@ca00000 {
> "cphy_csid1",
> "cphy_csid2",
> "cphy_csid3";
> - interconnects = <&mnoc 5 &bimc 5>;
> + interconnects = <&mnoc MASTER_VFE &bimc SLAVE_EBI>;
> interconnect-names = "vfe-mem";
> iommus = <&mmss_smmu 0xc00>,
> <&mmss_smmu 0xc01>,
> @@ -2097,8 +2098,8 @@ venus: video-codec@cc00000 {
> <&mmcc VIDEO_AXI_CLK>,
> <&mmcc THROTTLE_VIDEO_AXI_CLK>;
> clock-names = "core", "iface", "bus", "bus_throttle";
> - interconnects = <&gnoc 0 &mnoc 13>,
> - <&mnoc 4 &bimc 5>;
> + interconnects = <&gnoc MASTER_APSS_PROC &mnoc SLAVE_VENUS_CFG>,
> + <&mnoc MASTER_VENUS &bimc SLAVE_EBI>;
> interconnect-names = "cpu-cfg", "video-mem";
> interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
> iommus = <&mmss_smmu 0x400>,
> --
> 2.35.1
>
