Enable the smb2 charger driver and add a battery node to report the
battery stats correctly.
Signed-off-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
---
.../arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
index b3b6aa4e0fa3..1a5e127d7a43 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts
@@ -109,6 +109,14 @@ rmtfs_mem: memory@f6301000 {
};
};
+ battery: battery {
+ compatible = "simple-battery";
+
+ charge-full-design-microamp-hours = <4000000>;
+ voltage-min-design-microvolt = <3400000>;
+ voltage-max-design-microvolt = <4400000>;
+ };
+
vreg_s4a_1p8: vreg-s4a-1p8 {
compatible = "regulator-fixed";
regulator-name = "vreg_s4a_1p8";
@@ -302,6 +310,11 @@ vol_up_pin_a: vol-up-active {
};
};
+&pmi8998_charger {
+ status = "okay";
+ monitored-battery = <&battery>;
+};
+
&pm8998_pon {
resin {
compatible = "qcom,pm8941-resin";
--
2.36.1
