Add a node for the smb2 charger hardware found on the pmi8998.
Signed-off-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pmi8998.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index da10668c361d..962a8719b07a 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -9,6 +9,23 @@ pmi8998_lsid0: pmic@2 {
#address-cells = <1>;
#size-cells = <0>;
+ pmi8998_charger: charger@1000 {
+ compatible = "qcom,pmi8998-charger";
+ reg = <0x1000>;
+
+ interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
+ <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
+ <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change";
+
+ io-channels = <&pmi8998_rradc 3>,
+ <&pmi8998_rradc 4>;
+ io-channel-names = "usbin_i", "usbin_v";
+
+ status = "disabled";
+ };
+
pmi8998_gpio: gpios@c000 {
compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
--
2.36.1
