Re: [PATCH v4 3/3] iio: light: Add support for ltrf216a sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



11.05.2022 12:40, Shreeya Patel пишет:
> +static int ltrf216a_set_int_time(struct ltrf216a_data *data, int itime)
> +{
> +	int i, ret, index = -1;
> +	u8 reg_val;
> +
> +	for (i = 0; i < ARRAY_SIZE(ltrf216a_int_time_available); i++) {
> +		if (ltrf216a_int_time_available[i][1] == itime) {
> +			index = i;
> +			break;
> +		}
> +	}
> +
> +	if (index < 0)
> +		return -EINVAL;
> +
> +	reg_val = ltrf216a_int_time_reg[index][1];
> +	data->int_time_fac = ltrf216a_int_time_reg[index][0];
> +
> +	ret = i2c_smbus_write_byte_data(data->client, LTRF216A_ALS_MEAS_RES, reg_val);
> +	if (ret < 0)
> +		return ret;

Should the data->int_time_fac be updated only if I2C write was successful?

I'm not sure what reading of LTRF216A_CLEAR_DATA reg does, but if it
clears the measured data, then shouldn't the data be cleared after
changing the config?

> +	data->int_time = itime;
> +
> +	return 0;
> +}




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux