On Thu, May 12, 2022 at 07:27:08PM +0530, Manivannan Sadhasivam wrote:
> On Wed, May 04, 2022 at 12:46:36AM +0300, Serge Semin wrote:
> > In accordance with the generic PCIe Root Port DT-bindings the "dma-ranges"
> > property has the same format as the "ranges" property. The only difference
> > is in their semantics. The "dma-ranges" property describes the PCIe-to-CPU
> > memory mapping in opposite to the CPU-to-PCIe mapping of the "ranges"
> > property. Even though the DW PCIe controllers are normally equipped with
> > internal Address Translation Unit which inbound and outbound tables can be
> > used to implement both properties semantics, it was surprise for me to
> > discover that the host-related part of the DW PCIe driver currently
> > supports the "ranges" property only while the "dma-ranges" windows are
> > just ignored. Having the "dma-ranges" supported in the driver would be
> > very handy for the platforms, that don't tolerate the 1:1 CPU-PCIe memory
> > mapping and require customized the PCIe memory layout. So let's fix that
> > by introducing the "dma-ranges" property support.
> >
> > First of all we suggest to rename the dw_pcie_prog_inbound_atu() method to
> > dw_pcie_prog_ep_inbound_atu() and create a new version of the
> > dw_pcie_prog_inbound_atu() function. Thus we'll have two methods for RC
> > and EP controllers respectively in the same way as it has been developed
> > for the outbound ATU setup methods.
> >
> > Secondly aside with the memory window index and type the new
> > dw_pcie_prog_inbound_atu() function will accept CPU address, PCIe address
> > and size as its arguments. These parameters define the PCIe and CPU memory
> > ranges which will be used to setup the respective inbound ATU mapping. The
> > passed parameters need to be verified against the ATU ranges constraints
> > in the same way as it is done for the outbound ranges.
> >
> > Finally the DMA-ranges detected for the PCIe controller need to be
> > converted into the inbound ATU entries during the host controller
> > initialization procedure. It will be done in the framework of the
> > dw_pcie_iatu_setup() method. Note before setting the inbound ranges up we
> > need to disable all the inbound ATU entries in order to prevent unexpected
> > PCIe TLPs translations defined by some third party software like
> > bootloader.
> >
> > Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
> > ---
> > .../pci/controller/dwc/pcie-designware-ep.c | 4 +-
> > .../pci/controller/dwc/pcie-designware-host.c | 32 ++++++++++-
> > drivers/pci/controller/dwc/pcie-designware.c | 57 ++++++++++++++++++-
> > drivers/pci/controller/dwc/pcie-designware.h | 6 +-
> > 4 files changed, 90 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > index c62640201246..9b0540cfa9e8 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > @@ -167,8 +167,8 @@ static int dw_pcie_ep_inbound_atu(struct dw_pcie_ep *ep, u8 func_no, int type,
> > return -EINVAL;
> > }
> >
> > - ret = dw_pcie_prog_inbound_atu(pci, func_no, free_win, type,
> > - cpu_addr, bar);
> > + ret = dw_pcie_prog_ep_inbound_atu(pci, func_no, free_win, type,
> > + cpu_addr, bar);
> > if (ret < 0) {
> > dev_err(pci->dev, "Failed to program IB window\n");
> > return ret;
> > diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> > index 7caca6c575a5..9cb406f5c185 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> > @@ -612,12 +612,15 @@ static int dw_pcie_iatu_setup(struct pcie_port *pp)
> > }
> >
> > /*
> > - * Ensure all outbound windows are disabled before proceeding with
> > - * the MEM/IO ranges setups.
> > + * Ensure all out/inbound windows are disabled before proceeding with
> > + * the MEM/IO (dma-)ranges setups.
> > */
> > for (i = 0; i < pci->num_ob_windows; i++)
> > dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_OB, i);
> >
> > + for (i = 0; i < pci->num_ib_windows; i++)
> > + dw_pcie_disable_atu(pci, PCIE_ATU_REGION_DIR_IB, i);
> > +
> > i = 0;
> > resource_list_for_each_entry(entry, &pp->bridge->windows) {
> > if (resource_type(entry->res) != IORESOURCE_MEM)
> > @@ -654,9 +657,32 @@ static int dw_pcie_iatu_setup(struct pcie_port *pp)
> > }
> >
> > if (pci->num_ob_windows <= i)
> > - dev_warn(pci->dev, "Resources exceed number of ATU entries (%d)\n",
> > + dev_warn(pci->dev, "Ranges exceed outbound iATU size (%d)\n",
> > pci->num_ob_windows);
> >
> > + i = 0;
> > + resource_list_for_each_entry(entry, &pp->bridge->dma_ranges) {
> > + if (resource_type(entry->res) != IORESOURCE_MEM)
> > + continue;
> > +
> > + if (pci->num_ib_windows <= i)
> > + break;
> > +
> > + ret = dw_pcie_prog_inbound_atu(pci, i++, PCIE_ATU_TYPE_MEM,
> > + entry->res->start,
> > + entry->res->start - entry->offset,
> > + resource_size(entry->res));
> > + if (ret) {
> > + dev_err(pci->dev, "Failed to set DMA range %pr\n",
> > + entry->res);
> > + return ret;
> > + }
> > + }
> > +
> > + if (pci->num_ib_windows <= i)
> > + dev_warn(pci->dev, "Dma-ranges exceed inbound iATU size (%u)\n",
> > + pci->num_ib_windows);
> > +
> > return 0;
> > }
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > index 747e252c09e6..33718ed6c511 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > @@ -397,8 +397,61 @@ static inline void dw_pcie_writel_atu_ib(struct dw_pcie *pci, u32 index, u32 reg
> > dw_pcie_writel_atu(pci, PCIE_ATU_REGION_DIR_IB, index, reg, val);
> > }
> >
> > -int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, u8 func_no, int index,
> > - int type, u64 cpu_addr, u8 bar)
> > +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int type,
> > + u64 cpu_addr, u64 pci_addr, u64 size)
> > +{
> > + u64 limit_addr = pci_addr + size - 1;
> > + u32 retries, val;
> > +
> > + if ((limit_addr & ~pci->region_limit) != (pci_addr & ~pci->region_limit) ||
> > + !IS_ALIGNED(cpu_addr, pci->region_align) ||
> > + !IS_ALIGNED(pci_addr, pci->region_align) ||
> > + !IS_ALIGNED(size, pci->region_align) ||
>
> Why do you want the size to be aligned? What if I want to transfer a small size
> buffer?
>
> Same question applies to outbound programming as well.
You can't program a region with the unaligned size by the DW PCIe CSRs
design. The limit address lower bits are read-only and fixed with
one's in accordance with the IP-core synthesize parameter
CX_ATU_MIN_REGION_SIZE. So the mapping is always performed in the
CX_ATU_MIN_REGION_SIZE chunks.
IATU_LIMIT_ADDR_OFF_{IN,OUT}BOUND.LIMIT_ADDR_HW =
{(CX_ATU_MIN_REGION_SIZE == 65536) ? "0xffff" :
(CX_ATU_MIN_REGION_SIZE == 32768) ? "0x7fff" :
(CX_ATU_MIN_REGION_SIZE == 16384) ? "0x3fff" :
(CX_ATU_MIN_REGION_SIZE == 8192) ? "0x1fff" :
(CX_ATU_MIN_REGION_SIZE == 4096) ? "0xfff" : "0xffff"}
-Sergey
>
> Thanks,
> Mani
>
> --
> மணிவண்ணன் சதாசிவம்
