The Light Pulse Generator describes a hardware block responsible for
displaying colors and patterns on an RGB LED (usually used for [battery]
status and notifications), and drive PWM signals for general-purpose
(ie. backlight) LEDs. The availability and usage of the individual
channels differ per board and is hence left for individual platform DTs
to configure.
Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm660l.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
index cfef42353611..636b8d398d96 100644
--- a/arch/arm64/boot/dts/qcom/pm660l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -65,6 +65,15 @@ pmic@3 {
#address-cells = <1>;
#size-cells = <0>;
+ pm660l_lpg: lpg@b100 {
+ compatible = "qcom,pm660l-lpg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
pm660l_wled: leds@d800 {
compatible = "qcom,pm660l-wled";
reg = <0xd800 0xd900>;
--
2.36.1
