Re: [PATCH v3 2/2] dt-bindings: remoteproc: qcom: Add SC7280 MSS bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sibi,

On Wed, May 11, 2022 at 01:49:22PM +0530, Sibi Sankar wrote:
> Add MSS PIL loading bindings for SC7280 SoCs.
> 
> Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx>

There is already a binding for 'qcom,sc7280-mss-pil' in
Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt. Shouldn't
the entries from that file be deleted?

> 
> v3:
>  * Re-ordered clock list, fixed pdc_sync typo [Rob/Matthias]
> 
>  .../bindings/remoteproc/qcom,sc7280-mss-pil.yaml   | 261 +++++++++++++++++++++
>  1 file changed, 261 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
> new file mode 100644
> index 000000000000..2f95bfd7b3eb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-mss-pil.yaml
> @@ -0,0 +1,261 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,sc7280-mss-pil.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SC7280 MSS Peripheral Image Loader
> +
> +maintainers:
> +  - Sibi Sankar <quic_sibis@xxxxxxxxxxx>
> +
> +description:
> +  This document defines the binding for a component that loads and boots firmware
> +  on the Qualcomm Technology Inc. SC7280 Modem Hexagon Core.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,sc7280-mss-pil
> +
> +  reg:
> +    items:
> +      - description: MSS QDSP6 registers
> +      - description: RMB registers
> +
> +  reg-names:
> +    items:
> +      - const: qdsp6
> +      - const: rmb
> +
> +  iommus:
> +    items:
> +      - description: MSA Stream 1
> +      - description: MSA Stream 2
> +
> +  interconnects:
> +    items:
> +      - description: Path leading to system memory
> +
> +  interrupts:
> +    items:
> +      - description: Watchdog interrupt
> +      - description: Fatal interrupt
> +      - description: Ready interrupt
> +      - description: Handover interrupt
> +      - description: Stop acknowledge interrupt
> +      - description: Shutdown acknowledge interrupt
> +
> +  interrupt-names:
> +    items:
> +      - const: wdog
> +      - const: fatal
> +      - const: ready
> +      - const: handover
> +      - const: stop-ack
> +      - const: shutdown-ack


The existing binding (qcom,q6v5.txt) also has:

- interrupts-extended:
        Usage: required
	Value type: <prop-encoded-array>
	Definition: reference to the interrupts that match interrupt-names

That's covered implicitly by 'interrupts' I suppose?

> +
> +  clocks:
> +    items:
> +      - description: GCC MSS IFACE clock
> +      - description: GCC MSS OFFLINE clock
> +      - description: GCC MSS SNOC_AXI clock
> +      - description: RPMH PKA clock
> +      - description: RPMH XO clock
> +
> +  clock-names:
> +    items:
> +      - const: iface
> +      - const: offline
> +      - const: snoc_axi
> +      - const: pka
> +      - const: xo
> +
> +  power-domains:
> +    items:
> +      - description: CX power domain
> +      - description: MSS power domain
> +
> +  power-domain-names:
> +    items:
> +      - const: cx
> +      - const: mss
> +
> +  resets:
> +    items:
> +      - description: AOSS restart
> +      - description: PDC reset
> +
> +  reset-names:
> +    items:
> +      - const: mss_restart
> +      - const: pdc_reset
> +
> +  memory-region:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: Phandle reference to the reserved-memory for the MBA region followed
> +                 by the modem region.
> +
> +  firmware-name:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description:
> +      The name of the firmware which should be loaded for this remote
> +      processor.
> +
> +  qcom,halt-regs:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      Phandle reference to a syscon representing TCSR followed by the
> +      four offsets within syscon for q6, modem, nc and vq6 halt registers.
> +
> +  qcom,ext-regs:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      Two phandle references to syscons representing TCSR_REG and TCSR register
> +      space followed by the two offsets within the syscon to force_clk_en/rscc_disable
> +      and axim1_clk_off/crypto_clk_off registers respectively.
> +
> +  qcom,qaccept-regs:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      Phandle reference to a syscon representing TCSR followed by the
> +      three offsets within syscon for mdm, cx and axi qaccept registers.
> +
> +  qcom,qmp:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Reference to the AOSS side-channel message RAM.
> +
> +  qcom,smem-states:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: States used by the AP to signal the Hexagon core
> +    items:
> +      - description: Stop the modem
> +
> +  qcom,smem-state-names:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description: The names of the state bits used for SMP2P output
> +    const: stop
> +
> +  glink-edge:
> +    type: object
> +    description: |
> +      Qualcomm G-Link subnode which represents communication edge, channels
> +      and devices related to the DSP.
> +
> +    properties:
> +      interrupts:
> +        items:
> +          - description: IRQ from MSS to GLINK
> +
> +      mboxes:
> +        items:
> +          - description: Mailbox for communication between APPS and MSS
> +
> +      label:
> +        description: The names of the state bits used for SMP2P output
> +        items:
> +          - const: modem
> +
> +      qcom,remote-pid:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: ID of the shared memory used by GLINK for communication with MSS
> +
> +    required:
> +      - interrupts
> +      - mboxes
> +      - label
> +      - qcom,remote-pid
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - iommus
> +  - interconnects
> +  - interrupts
> +  - interrupt-names
> +  - clocks
> +  - clock-names
> +  - power-domains
> +  - power-domain-names
> +  - resets
> +  - reset-names
> +  - qcom,halt-regs
> +  - qcom,ext-regs
> +  - qcom,qaccept-regs
> +  - memory-region
> +  - qcom,qmp

'qcom,qmp' is marked as 'optional' in qcom,q6v5.txt



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux