Re: [PATCH net-next 02/14] dt-bindings: net: mediatek,net: add mt7986-eth binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, May 06, 2022 at 02:30:19PM +0200, Lorenzo Bianconi wrote:
> Introduce dts bindings for mt7986 soc in mediatek,net.yaml.
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/net/mediatek,net.yaml | 133 +++++++++++++++++-
>  1 file changed, 131 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml
> index 43cc4024ef98..da1294083eeb 100644
> --- a/Documentation/devicetree/bindings/net/mediatek,net.yaml
> +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml
> @@ -21,6 +21,7 @@ properties:
>        - mediatek,mt7623-eth
>        - mediatek,mt7622-eth
>        - mediatek,mt7629-eth
> +      - mediatek,mt7986-eth
>        - ralink,rt5350-eth
>  
>    reg:
> @@ -28,7 +29,7 @@ properties:
>  
>    interrupts:
>      minItems: 3
> -    maxItems: 3
> +    maxItems: 4

What's the new interrupt? This should describe what each entry is.

If the mt7986-eth must have all 4 interrupts, then the if/then needs a 
'minItems: 4'.

>  
>    power-domains:
>      maxItems: 1
> @@ -189,6 +190,43 @@ allOf:
>            minItems: 2
>            maxItems: 2
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: mediatek,mt7986-eth
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 15
> +          maxItems: 15
> +
> +        clock-names:
> +          items:
> +            - const: fe
> +            - const: gp2
> +            - const: gp1
> +            - const: wocpu1
> +            - const: wocpu0
> +            - const: sgmii_tx250m
> +            - const: sgmii_rx250m
> +            - const: sgmii_cdr_ref
> +            - const: sgmii_cdr_fb
> +            - const: sgmii2_tx250m
> +            - const: sgmii2_rx250m
> +            - const: sgmii2_cdr_ref
> +            - const: sgmii2_cdr_fb
> +            - const: netsys0
> +            - const: netsys1
> +
> +        mediatek,sgmiisys:
> +          minItems: 2
> +          maxItems: 2
> +

> +        assigned-clocks: true
> +
> +        assigned-clock-parents: true

These are automatically allowed on any node with 'clocks' (and now 
#clock-cells), so you can drop them.

> +
>  patternProperties:
>    "^mac@[0-1]$":
>      type: object
> @@ -219,7 +257,6 @@ required:
>    - interrupts
>    - clocks
>    - clock-names
> -  - power-domains

Is that because this chip doesn't have power domains, or support for 
them hasn't been added? In the latter case, then you should keep this. 

>    - mediatek,ethsys
>  
>  unevaluatedProperties: false
> @@ -295,3 +332,95 @@ examples:
>          };
>        };
>      };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/clock/mt7622-clk.h>
> +
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +
> +      eth: ethernet@15100000 {
> +        #define CLK_ETH_FE_EN            0
> +        #define CLK_ETH_WOCPU1_EN        3
> +        #define CLK_ETH_WOCPU0_EN        4
> +        #define CLK_TOP_NETSYS_SEL      43
> +        #define CLK_TOP_NETSYS_500M_SEL 44
> +        #define CLK_TOP_NETSYS_2X_SEL   46
> +        #define CLK_TOP_SGM_325M_SEL    47
> +        #define CLK_APMIXED_NET2PLL      1
> +        #define CLK_APMIXED_SGMPLL       3
> +
> +        compatible = "mediatek,mt7986-eth";
> +        reg = <0 0x15100000 0 0x80000>;
> +        interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
> +                     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&ethsys CLK_ETH_FE_EN>,
> +                 <&ethsys CLK_ETH_GP2_EN>,
> +                 <&ethsys CLK_ETH_GP1_EN>,
> +                 <&ethsys CLK_ETH_WOCPU1_EN>,
> +                 <&ethsys CLK_ETH_WOCPU0_EN>,
> +                 <&sgmiisys0 CLK_SGMII_TX250M_EN>,
> +                 <&sgmiisys0 CLK_SGMII_RX250M_EN>,
> +                 <&sgmiisys0 CLK_SGMII_CDR_REF>,
> +                 <&sgmiisys0 CLK_SGMII_CDR_FB>,
> +                 <&sgmiisys1 CLK_SGMII_TX250M_EN>,
> +                 <&sgmiisys1 CLK_SGMII_RX250M_EN>,
> +                 <&sgmiisys1 CLK_SGMII_CDR_REF>,
> +                 <&sgmiisys1 CLK_SGMII_CDR_FB>,
> +                 <&topckgen CLK_TOP_NETSYS_SEL>,
> +                 <&topckgen CLK_TOP_NETSYS_SEL>;
> +        clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0",
> +                      "sgmii_tx250m", "sgmii_rx250m",
> +                      "sgmii_cdr_ref", "sgmii_cdr_fb",
> +                      "sgmii2_tx250m", "sgmii2_rx250m",
> +                      "sgmii2_cdr_ref", "sgmii2_cdr_fb",
> +                      "netsys0", "netsys1";
> +        mediatek,ethsys = <&ethsys>;
> +        mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
> +        assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
> +                          <&topckgen CLK_TOP_SGM_325M_SEL>;
> +        assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
> +                                 <&apmixedsys CLK_APMIXED_SGMPLL>;
> +
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        mdio: mdio-bus {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          phy5: ethernet-phy@0 {
> +            compatible = "ethernet-phy-id67c9.de0a";
> +            phy-mode = "2500base-x";
> +            reset-gpios = <&pio 6 1>;
> +            reset-deassert-us = <20000>;
> +            reg = <5>;
> +          };
> +
> +          phy6: ethernet-phy@1 {
> +            compatible = "ethernet-phy-id67c9.de0a";
> +            phy-mode = "2500base-x";
> +            reg = <6>;
> +          };
> +        };
> +
> +        mac0: mac@0 {
> +          compatible = "mediatek,eth-mac";
> +          phy-mode = "2500base-x";
> +          phy-handle = <&phy5>;
> +          reg = <0>;
> +        };
> +
> +        mac1: mac@1 {
> +          compatible = "mediatek,eth-mac";
> +          phy-mode = "2500base-x";
> +          phy-handle = <&phy6>;
> +          reg = <1>;
> +        };
> +      };
> +    };
> -- 
> 2.35.1
> 
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux