From: Tyrone Ting <kfting@xxxxxxxxxxx> This patchset includes the following fixes: - Add dt-bindings description for NPCM845. - Bug fix for timeout calculation. - Better handling of spurious interrupts. - Fix for event type in slave mode. - Removal of own slave addresses [2:10]. - Support for next gen BMC (NPCM845). The NPCM I2C driver is tested on NPCM750 and NPCM845 evaluation boards. Addressed comments from: - Krzysztof Kozlowski : https://lkml.org/lkml/2022/3/3/289 - Andy Shevchenko : https://lkml.org/lkml/2022/3/3/286 - Andy Shevchenko : https://lkml.org/lkml/2022/4/5/140 - Andy Shevchenko : https://lkml.org/lkml/2022/3/3/295 Changes since version 3: - Correct the const format in if condition in i2c binding document. - Add the oops message statement and register information in register access width patch. - Add the occurring rate of the i2c spurious interrupt issue and more details in driver's behavior to overcome this issue. - Address Andy's comments in the patch to support NPCM845. Changes since version 2: - Keep old code as fallback, if getting nuvoton,sys-mgr property fails. - Fix the error reported by running 'make DT_CHECKER_FLAGS=-m dt_binding_check'. - Make nuvoton,sys-mgr required for nuvoton,npcm845-i2c. - Correct the patch's subject about changing the way of getting GCR regmap and add the description about keeping old code as fallback if getting nuvoton,sys-mgr property fails. - Correct the patch title and description about removing the unused variable clk_regmap. - Use the data field directly instead of the macros since macros are not constants anymore in this patch. Changes since version 1: - Add nuvoton,sys-mgr property in NPCM devicetree. - Describe the commit message in imperative mood. - Modify the description in i2c binding document to cover NPCM series. - Add new property in i2c binding document. - Create a new patch for client address calculation. - Create a new patch for updating gcr property name. - Create a new patch for removing unused clock node. - Explain EOB in the commit description. - Create a new patch for correcting NPCM register access width. - Remove some comment since the corresponding logic no longer exists. - Remove fixes tag while the patch adds an additional feature. - Use devicetree data field to support NPCM845. Tali Perry (6): i2c: npcm: Change the way of getting GCR regmap i2c: npcm: Remove unused variable clk_regmap i2c: npcm: Fix timeout calculation i2c: npcm: Add tx complete counter i2c: npcm: Handle spurious interrupts i2c: npcm: Remove own slave addresses 2:10 Tyrone Ting (3): dt-bindings: i2c: npcm: support NPCM845 i2c: npcm: Correct register access width i2c: npcm: Support NPCM845 .../bindings/i2c/nuvoton,npcm7xx-i2c.yaml | 25 +- drivers/i2c/busses/Kconfig | 8 +- drivers/i2c/busses/Makefile | 2 +- drivers/i2c/busses/i2c-npcm7xx.c | 277 +++++++++++------- 4 files changed, 196 insertions(+), 116 deletions(-) -- 2.17.1
