The change adds description of QCOm SM8450 camera clock controller.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
---
Changes from v3 to v5:
* none.
Changes from v2 to v3:
* account a renamed header file.
Changes from v1 to v2:
* disabled camcc device tree node by default
arch/arm64/boot/dts/qcom/sm8450.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 934e29b9e153..dc819f2f7651 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-sm8450.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm8450-camcc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
@@ -1011,6 +1012,25 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
};
};
+ camcc: clock-controller@ade0000 {
+ compatible = "qcom,sm8450-camcc";
+ reg = <0 0x0ade0000 0 0x20000>;
+ status = "disabled";
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>,
+ <&rpmhcc RPMH_CXO_CLK_A>,
+ <&sleep_clk>;
+ clock-names = "iface",
+ "bi_tcxo",
+ "bi_tcxo_ao",
+ "sleep_clk";
+ power-domains = <&rpmhpd SM8450_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sm8450-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
--
2.33.0
