Dne torek, 03. maj 2022 ob 19:54:34 CEST je Jernej Škrabec napisal(a):
> Dne ponedeljek, 02. maj 2022 ob 16:40:09 CEST je Chukun Pan napisal(a):
> > The NanoPi R1S H5 has a Realtek RTL8153B USB 3.0 Ethernet chip
> > connected to the USB 2.0 port of the Allwinner H5 SoC.
> >
> > Signed-off-by: Chukun Pan <amadeus@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts | 8 +++++++-
> > 1 file changed, 7 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts b/
> arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
> > index 55b369534a08..dd655a491549 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts
> > @@ -21,7 +21,8 @@ / {
> >
> > aliases {
> > ethernet0 = &emac;
> > - ethernet1 = &rtl8189etv;
> > + ethernet1 = &rtl8153;
> > + ethernet2 = &rtl8189etv;
Additionally, it's not a good idea to change order of ethernet nodes. It can
affect mac address assigning procedure in bootloader.
Best regards,
Jernej
> > serial0 = &uart0;
> > };
> >
> > @@ -116,6 +117,11 @@ &cpu0 {
> >
> > &ehci1 {
> > status = "okay";
>
> You need to add #address-cells and #size-cells properties, otherwise "make
> dtbs_check W=1" generates warnings.
>
> Best regards,
> Jernej
>
> > +
> > + rtl8153: device@1 {
> > + compatible = "usbbda,8153";
> > + reg = <1>;
> > + };
> > };
> >
> > &ehci2 {
> > --
> > 2.25.1
> >
> >
>
>
>
