Enable CPU opp tables for OrangePi One Plus. This needs to change the CPU regulator max voltage to fit the OPP table. Also add the ramp-delay information to avoid any out of spec running as the regulator is slower at reaching the voltage requested compare to the PLL reaching the frequency. There is no such information for AXP805 but similar PMIC (AXP813) has a DVM (Dynamic Voltage scaling Management) ramp rate equal to 2500uV/us. Signed-off-by: Chukun Pan <amadeus@xxxxxxxxxx> --- arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index 92745128fcfe..d7b82ef6be55 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -5,6 +5,7 @@ /dts-v1/; #include "sun50i-h6.dtsi" +#include "sun50i-h6-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -64,6 +65,10 @@ reg_vcc5v: vcc5v { }; }; +&cpu0 { + cpu-supply = <®_dcdca>; +}; + &de { status = "okay"; }; @@ -208,7 +213,8 @@ reg_cldo3: cldo3 { reg_dcdca: dcdca { regulator-always-on; regulator-min-microvolt = <810000>; - regulator-max-microvolt = <1080000>; + regulator-max-microvolt = <1160000>; + regulator-ramp-delay = <2500>; regulator-name = "vdd-cpu"; }; @@ -216,6 +222,7 @@ reg_dcdcc: dcdcc { regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; + regulator-ramp-delay = <2500>; regulator-name = "vdd-gpu"; }; -- 2.25.1