[PATCH 11/12] arm64: dts: exynosautov9: switch usi clocks

[Chanho Park <chanho61.park@xxxxxxxxxxx>]

This changes to use cmu clock nodes instead of dummy fixed-rate-clock.

Signed-off-by: Chanho Park <chanho61.park@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/exynos/exynosautov9.dtsi | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index 6f181632267b..149cf8c2a797 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -158,17 +158,6 @@ xtcxo: clock {
 			clock-output-names = "oscclk";
 		};
 
-		/*
-		 * Keep the stub clock for serial driver, until proper clock
-		 * driver is implemented.
-		 */
-		uart_clock: uart-clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <133250000>;
-			clock-output-names = "uart";
-		};
-
 		/*
 		 * Keep the stub clock for ufs driver, until proper clock
 		 * driver is implemented.
@@ -343,7 +332,8 @@ usi_0: usi@103000c0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			clocks = <&uart_clock>, <&uart_clock>;
+			clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>,
+				 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>;
 			clock-names = "pclk", "ipclk";
 			status = "disabled";
 
@@ -354,7 +344,8 @@ serial_0: serial@10300000 {
 				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&uart0_bus_dual>;
-				clocks = <&uart_clock>, <&uart_clock>;
+				clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PCLK_0>,
+					 <&cmu_peric0 CLK_GOUT_PERIC0_IPCLK_0>;
 				clock-names = "uart", "clk_uart_baud0";
 				status = "disabled";
 			};
-- 
2.36.0