On 29/04/2022 12:20, Laurent Pinchart wrote: > On Fri, Apr 29, 2022 at 12:13:46PM +0200, Hans Verkuil wrote: >> On 29/04/2022 12:07, Laurent Pinchart wrote: >>> On Fri, Apr 29, 2022 at 11:58:48AM +0200, Jacopo Mondi wrote: >>>> On Fri, Apr 29, 2022 at 10:43:09AM +0200, Hans Verkuil wrote: >>>>> On 29/04/2022 10:28, Eugen.Hristev@xxxxxxxxxxxxx wrote: >>>>>> On 4/29/22 11:17 AM, Hans Verkuil wrote: >>>>>>> On 10/03/2022 10:51, Eugen Hristev wrote: >>>>>>>> As a top MC video driver, the atmel-isc should not propagate the format to the >>>>>>>> subdevice, it should rather check at start_streaming() time if the subdev is properly >>>>>>>> configured with a compatible format. >>>>>>>> Removed the whole format finding logic, and reworked the format verification >>>>>>>> at start_streaming time, such that the ISC will return an error if the subdevice >>>>>>>> is not properly configured. To achieve this, media_pipeline_start >>>>>>>> is called and a link_validate callback is created to check the formats. >>>>>>>> With this being done, the module parameter 'sensor_preferred' makes no sense >>>>>>>> anymore. The ISC should not decide which format the sensor is using. The >>>>>>>> ISC should only cope with the situation and inform userspace if the streaming >>>>>>>> is possible in the current configuration. >>>>>>>> The redesign of the format propagation has also risen the question of the >>>>>>>> enumfmt callback. If enumfmt is called with an mbus_code, the enumfmt handler >>>>>>>> should only return the formats that are supported for this mbus_code. >>>>>>>> Otherwise, the enumfmt will report all the formats that the ISC could output. >>>>>>>> With this rework, the dynamic list of user formats is removed. It makes no >>>>>>>> more sense to identify at complete time which formats the sensor could emit, >>>>>>>> and add those into a separate dynamic list. >>>>>>>> The ISC will start with a simple preconfigured default format, and at >>>>>>>> link validate time, decide whether it can use the format that is configured >>>>>>>> on the sink or not. >>>>>>>> >>>>>>>> Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx> >>>>>>>> Reviewed-by: Jacopo Mondi <jacopo@xxxxxxxxxx> >>>>>>>> --- >>>>>>>> Changes in v9: >>>>>>>> - isc_link_validate now static >>>>>>>> >>>>>>>> Changes in v7: >>>>>>>> - minor typos as suggested by Jacopo >>>>>>>> - small changes, reduce some indentation, modified an index, as suggested by >>>>>>>> Jacopo >>>>>>>> >>>>>>>> Changes in v6: >>>>>>>> - reworked a bit enum_fmt as suggested by Jacopo >>>>>>>> >>>>>>>> Changes in v5: >>>>>>>> - removed user_formats dynamic list as it is now pointless >>>>>>>> - greatly simplified the enum_fmt function >>>>>>>> - removed some init code that was useless now >>>>>>>> >>>>>>>> Changes in v4: >>>>>>>> - moved validation code into link_validate and used media_pipeline_start >>>>>>>> - merged this patch with the enum_fmt patch which was previously in v3 of >>>>>>>> the series >>>>>>>> >>>>>>>> Changes in v3: >>>>>>>> - clamp to maximum resolution once the frame size from the subdev is found >>>>>>>> drivers/media/platform/atmel/atmel-isc-base.c | 412 ++++++++---------- >>>>>>>> .../media/platform/atmel/atmel-isc-scaler.c | 5 + >>>>>>>> drivers/media/platform/atmel/atmel-isc.h | 13 +- >>>>>>>> .../media/platform/atmel/atmel-sama5d2-isc.c | 20 + >>>>>>>> .../media/platform/atmel/atmel-sama7g5-isc.c | 20 + >>>>>>>> 5 files changed, 236 insertions(+), 234 deletions(-) >>>>>>>> >>>>>>>> diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c >>>>>>>> index ee1dda6707a0..fe2c0af58060 100644 >>>>>>>> --- a/drivers/media/platform/atmel/atmel-isc-base.c >>>>>>>> +++ b/drivers/media/platform/atmel/atmel-isc-base.c >>>>>>>> @@ -36,11 +36,6 @@ static unsigned int debug; >>>>>>>> module_param(debug, int, 0644); >>>>>>>> MODULE_PARM_DESC(debug, "debug level (0-2)"); >>>>>>>> >>>>>>>> -static unsigned int sensor_preferred = 1; >>>>>>>> -module_param(sensor_preferred, uint, 0644); >>>>>>>> -MODULE_PARM_DESC(sensor_preferred, >>>>>>>> - "Sensor is preferred to output the specified format (1-on 0-off), default 1"); >>>>>>>> - >>>>>>>> #define ISC_IS_FORMAT_RAW(mbus_code) \ >>>>>>>> (((mbus_code) & 0xf000) == 0x3000) >>>>>>>> >>>>>>>> @@ -337,6 +332,10 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count) >>>>>>>> unsigned long flags; >>>>>>>> int ret; >>>>>>>> >>>>>>>> + ret = media_pipeline_start(&isc->video_dev.entity, &isc->mpipe); >>>>>>> >>>>>>> The pipeline validation is done in start_streaming, but I don't think that >>>>>>> is the best place: if STREAMON is called before buffers are queued, then >>>>>>> an invalid pipeline isn't discovered until enough buffers are queued to >>>>>>> kick off start_streaming. >>>>>>> >>>>>>> Drivers like vsp1, omap3isp and the samsung drivers all do this in streamon(). >>>>>>> >>>>>>> I think that is the correct time to do this. >>>>>> >>>>>> Hello Hans, >>>>>> >>>>>> Initially (v2, v3) I had this in streamon(). The problem that I faced at >>>>>> that time was that streamoff was never called, so I could not call >>>>>> media_pipeline_stop(). Then Jacopo told me to move it to start_streaming >>>>>> (see change log for v4) , and I did not face any more problems. >>>> >>>> Yes indeed, seems I suggested to use media_pipeline_handler in a >>>> comment on your v3 >>>> >>>> "at s_stream time your top driver calls media_pipeline_start()" >>>> >>>> sorry about that, I should have looked around a bit more carefully and >>>> notice most drivers do so at vb2 streamon >>>> >>>> However I don't see media_pipeline_start being called at all in v3 of >>>> the patch >>>> >>>>> It's a mess. Looking at some drivers I see that omap3isp calls media_pipeline_stop >>>>> in streamoff (so will have the same problem as you described if VIDIOC_STREAMOFF >>>>> isn't called), exynos4-is does the same, but it also checks the streaming state in >>>>> the release() fop callback, so that would fix this problem. And vimc does this >>>>> in stop_streaming. >>>>> >>>>> I'm in favor of fixing this in vb2, that framework knows exactly when this needs >>>>> to be called. >>>> >>>> Are you suggesting to have vb2 to call media_pipeline_start() or is it >>>> more complex than this ? >>> >>> I think Hans meant adding a .validate() operation to vb2. >>> >>> vb2 is already quite complex, I don't think adding more features is a >>> good idea. I'd rather have vb2 focus on buffer management only >>> (.start_streaming() and .stop_streaming() shouldn't have been in there >>> in my opinion), and handle validation in the .streamon() handler. I'd >>> expect most drivers that deal with media pipelines to do more work in >>> .streamon() anyway. >> >> I disagree with that :-) >> >> It's vb2 that keeps track of the streaming state and when what actions >> need to be taken. Drivers really shouldn't need to care about the ioctls >> themselves, and just implement the relevant vb2 callbacks. Relying on >> drivers to handle any of the streaming ioctls is asking for problems, >> as this shows: most drivers implement this wrong today. >> >> The vb2 framework knows when e.g. the pipeline needs to be started or >> stopped, and can do this at the best time, without drivers needing to >> keep track of when streamon/off/release is called. Keep that logic in >> vb2. > > Pipeline management and buffer management are two different issues. > Don't forget about devices that have multiple video nodes, part of the > same pipeline (possibly a combination of output and capture nodes, or > all of the same type). Forcing drivers to go through vb2 operations to > handle the pipeline will be messy, will result in more bloat in vb2, and > make the result more bug-prone and harder to maintain. > > If pipeline management is too complex, let's simplify it, new helpers > can make sense, but not through vb2. > But it is vb2 that knows when streaming starts and stops. The driver just needs to be informed (e.g. prepare_streaming and unprepare_streaming ops). vb2 deals with buffer management and it keeps track of the streaming state and makes the streaming state transitions. That *is* an integral part of vb2. What is missing at the moment are callbacks done at streamon time and when the streaming stops (streamoff, or close() when is_streaming is true). If you want to implement stream validation in a driver, then there are a lot of things you need to do: - override streamon, make sure you call vb2_queue_is_busy(), validate the pipeline, then call vb2_streamon, if that fails, remember to stop the pipeline. - override streamoff, make sure you call vb2_queue_is_busy(), stop the pipeline and call vb2_streamoff. - in the release() function when the fh is closed, you have to check vb2_is_streaming(), check that you are the owner of the queue, and if true, stop the pipeline. By moving this to vb2 ops all you need to implement are the prepare and unprepare ops. Esp. the release() implementation is tricky. I'm pretty sure that drivers/media/platform/samsung/exynos4-is/fimc-lite.c is wrong, since it should only call media_pipeline_stop() for the owner of the queue. Instead it calls it for the last user of the queue. I see that fimc_lite_streamoff() is wrong too: you can safely call VIDIOC_STREAMOFF twice: the second streamoff just returns 0 without doing anything. Instead media_pipeline_stop is called without testing if the queue is streaming. And yes, this is in part because V4L2 has quite some history and certainly API choice were made in the past that we wouldn't make today. But vb2 shields you from that, and behaves much more like a proper state machine. I know you prefer to give a lot more control to driver developers, but in my experience very few developers can do things like this right. And it is really hard as a reviewer to check if all the corner cases are handled correctly in a driver. If vb2 is used, then I know things are called at the right time, and that makes my life as reviewer so much easier. There may still be a few drivers that really need to do this manually, and that's OK, but a driver like the atmel-isc doesn't need that at all. Regards, Hans
