On 29/04/2022 10:28, Eugen.Hristev@xxxxxxxxxxxxx wrote:
> On 4/29/22 11:17 AM, Hans Verkuil wrote:
>> On 10/03/2022 10:51, Eugen Hristev wrote:
>>> As a top MC video driver, the atmel-isc should not propagate the format to the
>>> subdevice, it should rather check at start_streaming() time if the subdev is properly
>>> configured with a compatible format.
>>> Removed the whole format finding logic, and reworked the format verification
>>> at start_streaming time, such that the ISC will return an error if the subdevice
>>> is not properly configured. To achieve this, media_pipeline_start
>>> is called and a link_validate callback is created to check the formats.
>>> With this being done, the module parameter 'sensor_preferred' makes no sense
>>> anymore. The ISC should not decide which format the sensor is using. The
>>> ISC should only cope with the situation and inform userspace if the streaming
>>> is possible in the current configuration.
>>> The redesign of the format propagation has also risen the question of the
>>> enumfmt callback. If enumfmt is called with an mbus_code, the enumfmt handler
>>> should only return the formats that are supported for this mbus_code.
>>> Otherwise, the enumfmt will report all the formats that the ISC could output.
>>> With this rework, the dynamic list of user formats is removed. It makes no
>>> more sense to identify at complete time which formats the sensor could emit,
>>> and add those into a separate dynamic list.
>>> The ISC will start with a simple preconfigured default format, and at
>>> link validate time, decide whether it can use the format that is configured
>>> on the sink or not.
>>>
>>> Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
>>> Reviewed-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
>>> ---
>>> Changes in v9:
>>> - isc_link_validate now static
>>>
>>> Changes in v7:
>>> - minor typos as suggested by Jacopo
>>> - small changes, reduce some indentation, modified an index, as suggested by
>>> Jacopo
>>>
>>> Changes in v6:
>>> - reworked a bit enum_fmt as suggested by Jacopo
>>>
>>> Changes in v5:
>>> - removed user_formats dynamic list as it is now pointless
>>> - greatly simplified the enum_fmt function
>>> - removed some init code that was useless now
>>>
>>> Changes in v4:
>>> - moved validation code into link_validate and used media_pipeline_start
>>> - merged this patch with the enum_fmt patch which was previously in v3 of
>>> the series
>>>
>>> Changes in v3:
>>> - clamp to maximum resolution once the frame size from the subdev is found
>>> drivers/media/platform/atmel/atmel-isc-base.c | 412 ++++++++----------
>>> .../media/platform/atmel/atmel-isc-scaler.c | 5 +
>>> drivers/media/platform/atmel/atmel-isc.h | 13 +-
>>> .../media/platform/atmel/atmel-sama5d2-isc.c | 20 +
>>> .../media/platform/atmel/atmel-sama7g5-isc.c | 20 +
>>> 5 files changed, 236 insertions(+), 234 deletions(-)
>>>
>>> diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
>>> index ee1dda6707a0..fe2c0af58060 100644
>>> --- a/drivers/media/platform/atmel/atmel-isc-base.c
>>> +++ b/drivers/media/platform/atmel/atmel-isc-base.c
>>> @@ -36,11 +36,6 @@ static unsigned int debug;
>>> module_param(debug, int, 0644);
>>> MODULE_PARM_DESC(debug, "debug level (0-2)");
>>>
>>> -static unsigned int sensor_preferred = 1;
>>> -module_param(sensor_preferred, uint, 0644);
>>> -MODULE_PARM_DESC(sensor_preferred,
>>> - "Sensor is preferred to output the specified format (1-on 0-off), default 1");
>>> -
>>> #define ISC_IS_FORMAT_RAW(mbus_code) \
>>> (((mbus_code) & 0xf000) == 0x3000)
>>>
>>> @@ -337,6 +332,10 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
>>> unsigned long flags;
>>> int ret;
>>>
>>> + ret = media_pipeline_start(&isc->video_dev.entity, &isc->mpipe);
>>
>> The pipeline validation is done in start_streaming, but I don't think that
>> is the best place: if STREAMON is called before buffers are queued, then
>> an invalid pipeline isn't discovered until enough buffers are queued to
>> kick off start_streaming.
>>
>> Drivers like vsp1, omap3isp and the samsung drivers all do this in streamon().
>>
>> I think that is the correct time to do this.
>
> Hello Hans,
>
> Initially (v2, v3) I had this in streamon(). The problem that I faced at
> that time was that streamoff was never called, so I could not call
> media_pipeline_stop(). Then Jacopo told me to move it to start_streaming
> (see change log for v4) , and I did not face any more problems.
It's a mess. Looking at some drivers I see that omap3isp calls media_pipeline_stop
in streamoff (so will have the same problem as you described if VIDIOC_STREAMOFF
isn't called), exynos4-is does the same, but it also checks the streaming state in
the release() fop callback, so that would fix this problem. And vimc does this
in stop_streaming.
I'm in favor of fixing this in vb2, that framework knows exactly when this needs
to be called.
I'd like to know what others think.
Regards,
Hans
>
> Eugen
>
>>
>> Laurent, Jacopo, do you agree with that?
>>
>> I notice that quite a few other drivers do this in start_streaming as well,
>> but I think it just weird that a QBUF can return EPIPE while STREAMON might
>> succeed.
>>
>> Perhaps we need an optional vb2 validate() callback that is called by
>> vb2_core_streamon() to validate the pipeline before streaming. That makes
>> it easier to implement these checks rather than having to implement your
>> own streamon ioctl.
>>
>> Regards,
>>
>> Hans
>>
>>> + if (ret)
>>> + goto err_pipeline_start;
>>> +
>>> /* Enable stream on the sub device */
>>> ret = v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 1);
>>> if (ret && ret != -ENOIOCTLCMD) {
>>> @@ -385,6 +384,9 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
>>> v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0);
>>>
>>> err_start_stream:
>>> + media_pipeline_stop(&isc->video_dev.entity);
>>> +
>>> +err_pipeline_start:
>>> spin_lock_irqsave(&isc->dma_queue_lock, flags);
>>> list_for_each_entry(buf, &isc->dma_queue, list)
>>> vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
>>> @@ -423,6 +425,9 @@ static void isc_stop_streaming(struct vb2_queue *vq)
>>> if (ret && ret != -ENOIOCTLCMD)
>>> v4l2_err(&isc->v4l2_dev, "stream off failed in subdev\n");
>>>
>>> + /* Stop media pipeline */
>>> + media_pipeline_stop(&isc->video_dev.entity);
>>> +
>>> /* Release all active buffers */
>>> spin_lock_irqsave(&isc->dma_queue_lock, flags);
>>> if (unlikely(isc->cur_frm)) {
>>> @@ -453,22 +458,6 @@ static void isc_buffer_queue(struct vb2_buffer *vb)
>>> spin_unlock_irqrestore(&isc->dma_queue_lock, flags);
>>> }
>>>
>>> -static struct isc_format *find_format_by_fourcc(struct isc_device *isc,
>>> - unsigned int fourcc)
>>> -{
>>> - unsigned int num_formats = isc->num_user_formats;
>>> - struct isc_format *fmt;
>>> - unsigned int i;
>>> -
>>> - for (i = 0; i < num_formats; i++) {
>>> - fmt = isc->user_formats[i];
>>> - if (fmt->fourcc == fourcc)
>>> - return fmt;
>>> - }
>>> -
>>> - return NULL;
>>> -}
>>> -
>>> static const struct vb2_ops isc_vb2_ops = {
>>> .queue_setup = isc_queue_setup,
>>> .wait_prepare = vb2_ops_wait_prepare,
>>> @@ -497,23 +486,57 @@ static int isc_enum_fmt_vid_cap(struct file *file, void *priv,
>>> {
>>> struct isc_device *isc = video_drvdata(file);
>>> u32 index = f->index;
>>> - u32 i, supported_index;
>>> + u32 i, supported_index = 0;
>>> + struct isc_format *fmt;
>>> +
>>> + /*
>>> + * If we are not asked a specific mbus_code, we have to report all
>>> + * the formats that we can output.
>>> + */
>>> + if (!f->mbus_code) {
>>> + if (index >= isc->controller_formats_size)
>>> + return -EINVAL;
>>>
>>> - if (index < isc->controller_formats_size) {
>>> f->pixelformat = isc->controller_formats[index].fourcc;
>>> +
>>> + return 0;
>>> + }
>>> +
>>> + /*
>>> + * If a specific mbus_code is requested, check if we support
>>> + * this mbus_code as input for the ISC.
>>> + * If it's supported, then we report the corresponding pixelformat
>>> + * as first possible option for the ISC.
>>> + * E.g. mbus MEDIA_BUS_FMT_YUYV8_2X8 and report
>>> + * 'YUYV' (YUYV 4:2:2)
>>> + */
>>> + fmt = isc_find_format_by_code(isc, f->mbus_code, &i);
>>> + if (!fmt)
>>> + return -EINVAL;
>>> +
>>> + if (!index) {
>>> + f->pixelformat = fmt->fourcc;
>>> +
>>> return 0;
>>> }
>>>
>>> - index -= isc->controller_formats_size;
>>> + supported_index++;
>>>
>>> - supported_index = 0;
>>> + /* If the index is not raw, we don't have anymore formats to report */
>>> + if (!ISC_IS_FORMAT_RAW(f->mbus_code))
>>> + return -EINVAL;
>>>
>>> - for (i = 0; i < isc->formats_list_size; i++) {
>>> - if (!ISC_IS_FORMAT_RAW(isc->formats_list[i].mbus_code) ||
>>> - !isc->formats_list[i].sd_support)
>>> + /*
>>> + * We are asked for a specific mbus code, which is raw.
>>> + * We have to search through the formats we can convert to.
>>> + * We have to skip the raw formats, we cannot convert to raw.
>>> + * E.g. 'AR12' (16-bit ARGB 4-4-4-4), 'AR15' (16-bit ARGB 1-5-5-5), etc.
>>> + */
>>> + for (i = 0; i < isc->controller_formats_size; i++) {
>>> + if (isc->controller_formats[i].raw)
>>> continue;
>>> - if (supported_index == index) {
>>> - f->pixelformat = isc->formats_list[i].fourcc;
>>> + if (index == supported_index) {
>>> + f->pixelformat = isc->controller_formats[i].fourcc;
>>> return 0;
>>> }
>>> supported_index++;
>>> @@ -584,20 +607,30 @@ static int isc_try_validate_formats(struct isc_device *isc)
>>> break;
>>> default:
>>> /* any other different formats are not supported */
>>> + v4l2_err(&isc->v4l2_dev, "Requested unsupported format.\n");
>>> ret = -EINVAL;
>>> }
>>> v4l2_dbg(1, debug, &isc->v4l2_dev,
>>> "Format validation, requested rgb=%u, yuv=%u, grey=%u, bayer=%u\n",
>>> rgb, yuv, grey, bayer);
>>>
>>> - /* we cannot output RAW if we do not receive RAW */
>>> - if ((bayer) && !ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code))
>>> + if (bayer &&
>>> + !ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) {
>>> + v4l2_err(&isc->v4l2_dev, "Cannot output RAW if we do not receive RAW.\n");
>>> return -EINVAL;
>>> + }
>>>
>>> - /* we cannot output GREY if we do not receive RAW/GREY */
>>> if (grey && !ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code) &&
>>> - !ISC_IS_FORMAT_GREY(isc->try_config.sd_format->mbus_code))
>>> + !ISC_IS_FORMAT_GREY(isc->try_config.sd_format->mbus_code)) {
>>> + v4l2_err(&isc->v4l2_dev, "Cannot output GREY if we do not receive RAW/GREY.\n");
>>> return -EINVAL;
>>> + }
>>> +
>>> + if ((rgb || bayer || yuv) &&
>>> + ISC_IS_FORMAT_GREY(isc->try_config.sd_format->mbus_code)) {
>>> + v4l2_err(&isc->v4l2_dev, "Cannot convert GREY to another format.\n");
>>> + return -EINVAL;
>>> + }
>>>
>>> return ret;
>>> }
>>> @@ -825,7 +858,7 @@ static void isc_try_fse(struct isc_device *isc,
>>> * If we do not know yet which format the subdev is using, we cannot
>>> * do anything.
>>> */
>>> - if (!isc->try_config.sd_format)
>>> + if (!isc->config.sd_format)
>>> return;
>>>
>>> fse.code = isc->try_config.sd_format->mbus_code;
>>> @@ -846,180 +879,140 @@ static void isc_try_fse(struct isc_device *isc,
>>> }
>>> }
>>>
>>> -static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f,
>>> - u32 *code)
>>> +static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f)
>>> {
>>> - int i;
>>> - struct isc_format *sd_fmt = NULL, *direct_fmt = NULL;
>>> struct v4l2_pix_format *pixfmt = &f->fmt.pix;
>>> - struct v4l2_subdev_pad_config pad_cfg = {};
>>> - struct v4l2_subdev_state pad_state = {
>>> - .pads = &pad_cfg
>>> - };
>>> - struct v4l2_subdev_format format = {
>>> - .which = V4L2_SUBDEV_FORMAT_TRY,
>>> - };
>>> - u32 mbus_code;
>>> - int ret;
>>> - bool rlp_dma_direct_dump = false;
>>> + unsigned int i;
>>>
>>> if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
>>> return -EINVAL;
>>>
>>> - /* Step 1: find a RAW format that is supported */
>>> - for (i = 0; i < isc->num_user_formats; i++) {
>>> - if (ISC_IS_FORMAT_RAW(isc->user_formats[i]->mbus_code)) {
>>> - sd_fmt = isc->user_formats[i];
>>> + isc->try_config.fourcc = isc->controller_formats[0].fourcc;
>>> +
>>> + /* find if the format requested is supported */
>>> + for (i = 0; i < isc->controller_formats_size; i++)
>>> + if (isc->controller_formats[i].fourcc == pixfmt->pixelformat) {
>>> + isc->try_config.fourcc = pixfmt->pixelformat;
>>> break;
>>> }
>>> - }
>>> - /* Step 2: We can continue with this RAW format, or we can look
>>> - * for better: maybe sensor supports directly what we need.
>>> - */
>>> - direct_fmt = find_format_by_fourcc(isc, pixfmt->pixelformat);
>>> -
>>> - /* Step 3: We have both. We decide given the module parameter which
>>> - * one to use.
>>> - */
>>> - if (direct_fmt && sd_fmt && sensor_preferred)
>>> - sd_fmt = direct_fmt;
>>> -
>>> - /* Step 4: we do not have RAW but we have a direct format. Use it. */
>>> - if (direct_fmt && !sd_fmt)
>>> - sd_fmt = direct_fmt;
>>> -
>>> - /* Step 5: if we are using a direct format, we need to package
>>> - * everything as 8 bit data and just dump it
>>> - */
>>> - if (sd_fmt == direct_fmt)
>>> - rlp_dma_direct_dump = true;
>>> -
>>> - /* Step 6: We have no format. This can happen if the userspace
>>> - * requests some weird/invalid format.
>>> - * In this case, default to whatever we have
>>> - */
>>> - if (!sd_fmt && !direct_fmt) {
>>> - sd_fmt = isc->user_formats[isc->num_user_formats - 1];
>>> - v4l2_dbg(1, debug, &isc->v4l2_dev,
>>> - "Sensor not supporting %.4s, using %.4s\n",
>>> - (char *)&pixfmt->pixelformat, (char *)&sd_fmt->fourcc);
>>> - }
>>> -
>>> - if (!sd_fmt) {
>>> - ret = -EINVAL;
>>> - goto isc_try_fmt_err;
>>> - }
>>> -
>>> - /* Step 7: Print out what we decided for debugging */
>>> - v4l2_dbg(1, debug, &isc->v4l2_dev,
>>> - "Preferring to have sensor using format %.4s\n",
>>> - (char *)&sd_fmt->fourcc);
>>>
>>> - /* Step 8: at this moment we decided which format the subdev will use */
>>> - isc->try_config.sd_format = sd_fmt;
>>> + isc_try_configure_rlp_dma(isc, false);
>>>
>>> /* Limit to Atmel ISC hardware capabilities */
>>> - if (pixfmt->width > isc->max_width)
>>> - pixfmt->width = isc->max_width;
>>> - if (pixfmt->height > isc->max_height)
>>> - pixfmt->height = isc->max_height;
>>> -
>>> - /*
>>> - * The mbus format is the one the subdev outputs.
>>> - * The pixels will be transferred in this format Sensor -> ISC
>>> - */
>>> - mbus_code = sd_fmt->mbus_code;
>>> -
>>> - /*
>>> - * Validate formats. If the required format is not OK, default to raw.
>>> - */
>>> -
>>> - isc->try_config.fourcc = pixfmt->pixelformat;
>>> -
>>> - if (isc_try_validate_formats(isc)) {
>>> - pixfmt->pixelformat = isc->try_config.fourcc = sd_fmt->fourcc;
>>> - /* Re-try to validate the new format */
>>> - ret = isc_try_validate_formats(isc);
>>> - if (ret)
>>> - goto isc_try_fmt_err;
>>> - }
>>> -
>>> - ret = isc_try_configure_rlp_dma(isc, rlp_dma_direct_dump);
>>> - if (ret)
>>> - goto isc_try_fmt_err;
>>> -
>>> - ret = isc_try_configure_pipeline(isc);
>>> - if (ret)
>>> - goto isc_try_fmt_err;
>>> -
>>> - /* Obtain frame sizes if possible to have crop requirements ready */
>>> - isc_try_fse(isc, &pad_state);
>>> -
>>> - v4l2_fill_mbus_format(&format.format, pixfmt, mbus_code);
>>> - ret = v4l2_subdev_call(isc->current_subdev->sd, pad, set_fmt,
>>> - &pad_state, &format);
>>> - if (ret < 0)
>>> - goto isc_try_fmt_subdev_err;
>>> -
>>> - v4l2_fill_pix_format(pixfmt, &format.format);
>>> + v4l_bound_align_image(&pixfmt->width, 16, isc->max_width, 0,
>>> + &pixfmt->height, 16, isc->max_height, 0, 0);
>>> + /* If we did not find the requested format, we will fallback here */
>>> + pixfmt->pixelformat = isc->try_config.fourcc;
>>> + pixfmt->colorspace = V4L2_COLORSPACE_SRGB;
>>> + pixfmt->field = V4L2_FIELD_NONE;
>>>
>>> - /* Limit to Atmel ISC hardware capabilities */
>>> - if (pixfmt->width > isc->max_width)
>>> - pixfmt->width = isc->max_width;
>>> - if (pixfmt->height > isc->max_height)
>>> - pixfmt->height = isc->max_height;
>>>
>>> - pixfmt->field = V4L2_FIELD_NONE;
>>> pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp_v4l2) >> 3;
>>> pixfmt->sizeimage = ((pixfmt->width * isc->try_config.bpp) >> 3) *
>>> pixfmt->height;
>>>
>>> - if (code)
>>> - *code = mbus_code;
>>> + isc->try_fmt = *f;
>>>
>>> return 0;
>>> +}
>>>
>>> -isc_try_fmt_err:
>>> - v4l2_err(&isc->v4l2_dev, "Could not find any possible format for a working pipeline\n");
>>> -isc_try_fmt_subdev_err:
>>> - memset(&isc->try_config, 0, sizeof(isc->try_config));
>>> +static int isc_set_fmt(struct isc_device *isc, struct v4l2_format *f)
>>> +{
>>> + isc_try_fmt(isc, f);
>>>
>>> - return ret;
>>> + /* make the try configuration active */
>>> + isc->config = isc->try_config;
>>> + isc->fmt = isc->try_fmt;
>>> +
>>> + v4l2_dbg(1, debug, &isc->v4l2_dev, "ISC set_fmt to %.4s @%dx%d\n",
>>> + (char *)&f->fmt.pix.pixelformat,
>>> + f->fmt.pix.width, f->fmt.pix.height);
>>> +
>>> + return 0;
>>> }
>>>
>>> -static int isc_set_fmt(struct isc_device *isc, struct v4l2_format *f)
>>> +static int isc_validate(struct isc_device *isc)
>>> {
>>> + int ret;
>>> + int i;
>>> + struct isc_format *sd_fmt = NULL;
>>> + struct v4l2_pix_format *pixfmt = &isc->fmt.fmt.pix;
>>> struct v4l2_subdev_format format = {
>>> .which = V4L2_SUBDEV_FORMAT_ACTIVE,
>>> + .pad = isc->remote_pad,
>>> + };
>>> + struct v4l2_subdev_pad_config pad_cfg = {};
>>> + struct v4l2_subdev_state pad_state = {
>>> + .pads = &pad_cfg,
>>> };
>>> - u32 mbus_code = 0;
>>> - int ret;
>>>
>>> - ret = isc_try_fmt(isc, f, &mbus_code);
>>> + /* Get current format from subdev */
>>> + ret = v4l2_subdev_call(isc->current_subdev->sd, pad, get_fmt, NULL,
>>> + &format);
>>> if (ret)
>>> return ret;
>>>
>>> - v4l2_fill_mbus_format(&format.format, &f->fmt.pix, mbus_code);
>>> - ret = v4l2_subdev_call(isc->current_subdev->sd, pad,
>>> - set_fmt, NULL, &format);
>>> - if (ret < 0)
>>> - return ret;
>>> + /* Identify the subdev's format configuration */
>>> + for (i = 0; i < isc->formats_list_size; i++)
>>> + if (isc->formats_list[i].mbus_code == format.format.code) {
>>> + sd_fmt = &isc->formats_list[i];
>>> + break;
>>> + }
>>> +
>>> + /* Check if the format is not supported */
>>> + if (!sd_fmt) {
>>> + v4l2_err(&isc->v4l2_dev,
>>> + "Current subdevice is streaming a media bus code that is not supported 0x%x\n",
>>> + format.format.code);
>>> + return -EPIPE;
>>> + }
>>> +
>>> + /* At this moment we know which format the subdev will use */
>>> + isc->try_config.sd_format = sd_fmt;
>>> +
>>> + /* If the sensor is not RAW, we can only do a direct dump */
>>> + if (!ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code))
>>> + isc_try_configure_rlp_dma(isc, true);
>>>
>>> /* Limit to Atmel ISC hardware capabilities */
>>> - if (f->fmt.pix.width > isc->max_width)
>>> - f->fmt.pix.width = isc->max_width;
>>> - if (f->fmt.pix.height > isc->max_height)
>>> - f->fmt.pix.height = isc->max_height;
>>> + v4l_bound_align_image(&format.format.width, 16, isc->max_width, 0,
>>> + &format.format.height, 16, isc->max_height, 0, 0);
>>>
>>> - isc->fmt = *f;
>>> + /* Check if the frame size is the same. Otherwise we may overflow */
>>> + if (pixfmt->height != format.format.height ||
>>> + pixfmt->width != format.format.width) {
>>> + v4l2_err(&isc->v4l2_dev,
>>> + "ISC not configured with the proper frame size: %dx%d\n",
>>> + format.format.width, format.format.height);
>>> + return -EPIPE;
>>> + }
>>>
>>> + v4l2_dbg(1, debug, &isc->v4l2_dev,
>>> + "Identified subdev using format %.4s with %dx%d %d bpp\n",
>>> + (char *)&sd_fmt->fourcc, pixfmt->width, pixfmt->height,
>>> + isc->try_config.bpp);
>>> +
>>> + /* Reset and restart AWB if the subdevice changed the format */
>>> if (isc->try_config.sd_format && isc->config.sd_format &&
>>> isc->try_config.sd_format != isc->config.sd_format) {
>>> isc->ctrls.hist_stat = HIST_INIT;
>>> isc_reset_awb_ctrls(isc);
>>> isc_update_v4l2_ctrls(isc);
>>> }
>>> - /* make the try configuration active */
>>> +
>>> + /* Validate formats */
>>> + ret = isc_try_validate_formats(isc);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + /* Obtain frame sizes if possible to have crop requirements ready */
>>> + isc_try_fse(isc, &pad_state);
>>> +
>>> + /* Configure ISC pipeline for the config */
>>> + ret = isc_try_configure_pipeline(isc);
>>> + if (ret)
>>> + return ret;
>>> +
>>> isc->config = isc->try_config;
>>>
>>> v4l2_dbg(1, debug, &isc->v4l2_dev, "New ISC configuration in place\n");
>>> @@ -1043,7 +1036,7 @@ static int isc_try_fmt_vid_cap(struct file *file, void *priv,
>>> {
>>> struct isc_device *isc = video_drvdata(file);
>>>
>>> - return isc_try_fmt(isc, f, NULL);
>>> + return isc_try_fmt(isc, f);
>>> }
>>>
>>> static int isc_enum_input(struct file *file, void *priv,
>>> @@ -1098,10 +1091,6 @@ static int isc_enum_framesizes(struct file *file, void *fh,
>>> if (fsize->index)
>>> return -EINVAL;
>>>
>>> - for (i = 0; i < isc->num_user_formats; i++)
>>> - if (isc->user_formats[i]->fourcc == fsize->pixel_format)
>>> - ret = 0;
>>> -
>>> for (i = 0; i < isc->controller_formats_size; i++)
>>> if (isc->controller_formats[i].fourcc == fsize->pixel_format)
>>> ret = 0;
>>> @@ -1782,52 +1771,6 @@ struct isc_format *isc_find_format_by_code(struct isc_device *isc,
>>> }
>>> EXPORT_SYMBOL_GPL(isc_find_format_by_code);
>>>
>>> -static int isc_formats_init(struct isc_device *isc)
>>> -{
>>> - struct isc_format *fmt;
>>> - struct v4l2_subdev *subdev = isc->current_subdev->sd;
>>> - unsigned int num_fmts, i, j;
>>> - u32 list_size = isc->formats_list_size;
>>> - struct v4l2_subdev_mbus_code_enum mbus_code = {
>>> - .which = V4L2_SUBDEV_FORMAT_ACTIVE,
>>> - };
>>> -
>>> - num_fmts = 0;
>>> - while (!v4l2_subdev_call(subdev, pad, enum_mbus_code,
>>> - NULL, &mbus_code)) {
>>> - mbus_code.index++;
>>> -
>>> - fmt = isc_find_format_by_code(isc, mbus_code.code, &i);
>>> - if (!fmt) {
>>> - v4l2_warn(&isc->v4l2_dev, "Mbus code %x not supported\n",
>>> - mbus_code.code);
>>> - continue;
>>> - }
>>> -
>>> - fmt->sd_support = true;
>>> - num_fmts++;
>>> - }
>>> -
>>> - if (!num_fmts)
>>> - return -ENXIO;
>>> -
>>> - isc->num_user_formats = num_fmts;
>>> - isc->user_formats = devm_kcalloc(isc->dev,
>>> - num_fmts, sizeof(*isc->user_formats),
>>> - GFP_KERNEL);
>>> - if (!isc->user_formats)
>>> - return -ENOMEM;
>>> -
>>> - fmt = &isc->formats_list[0];
>>> - for (i = 0, j = 0; i < list_size; i++) {
>>> - if (fmt->sd_support)
>>> - isc->user_formats[j++] = fmt;
>>> - fmt++;
>>> - }
>>> -
>>> - return 0;
>>> -}
>>> -
>>> static int isc_set_default_fmt(struct isc_device *isc)
>>> {
>>> struct v4l2_format f = {
>>> @@ -1836,12 +1779,12 @@ static int isc_set_default_fmt(struct isc_device *isc)
>>> .width = VGA_WIDTH,
>>> .height = VGA_HEIGHT,
>>> .field = V4L2_FIELD_NONE,
>>> - .pixelformat = isc->user_formats[0]->fourcc,
>>> + .pixelformat = isc->controller_formats[0].fourcc,
>>> },
>>> };
>>> int ret;
>>>
>>> - ret = isc_try_fmt(isc, &f, NULL);
>>> + ret = isc_try_fmt(isc, &f);
>>> if (ret)
>>> return ret;
>>>
>>> @@ -1896,13 +1839,6 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
>>> spin_lock_init(&isc->dma_queue_lock);
>>> spin_lock_init(&isc->awb_lock);
>>>
>>> - ret = isc_formats_init(isc);
>>> - if (ret < 0) {
>>> - v4l2_err(&isc->v4l2_dev,
>>> - "Init format failed: %d\n", ret);
>>> - goto isc_async_complete_err;
>>> - }
>>> -
>>> ret = isc_set_default_fmt(isc);
>>> if (ret) {
>>> v4l2_err(&isc->v4l2_dev, "Could not set default format\n");
>>> @@ -2016,6 +1952,24 @@ int isc_pipeline_init(struct isc_device *isc)
>>> }
>>> EXPORT_SYMBOL_GPL(isc_pipeline_init);
>>>
>>> +static int isc_link_validate(struct media_link *link)
>>> +{
>>> + struct video_device *vdev =
>>> + media_entity_to_video_device(link->sink->entity);
>>> + struct isc_device *isc = video_get_drvdata(vdev);
>>> + int ret;
>>> +
>>> + ret = v4l2_subdev_link_validate(link);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + return isc_validate(isc);
>>> +}
>>> +
>>> +static const struct media_entity_operations isc_entity_operations = {
>>> + .link_validate = isc_link_validate,
>>> +};
>>> +
>>> int isc_mc_init(struct isc_device *isc, u32 ver)
>>> {
>>> const struct of_device_id *match;
>>> @@ -2023,6 +1977,8 @@ int isc_mc_init(struct isc_device *isc, u32 ver)
>>>
>>> isc->video_dev.entity.function = MEDIA_ENT_F_IO_V4L;
>>> isc->video_dev.entity.flags = MEDIA_ENT_FL_DEFAULT;
>>> + isc->video_dev.entity.ops = &isc_entity_operations;
>>> +
>>> isc->pads[ISC_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
>>>
>>> ret = media_entity_pads_init(&isc->video_dev.entity, ISC_PADS_NUM,
>>> diff --git a/drivers/media/platform/atmel/atmel-isc-scaler.c b/drivers/media/platform/atmel/atmel-isc-scaler.c
>>> index a1ca4633787c..2b0621297dfe 100644
>>> --- a/drivers/media/platform/atmel/atmel-isc-scaler.c
>>> +++ b/drivers/media/platform/atmel/atmel-isc-scaler.c
>>> @@ -173,6 +173,10 @@ static const struct v4l2_subdev_pad_ops isc_scaler_pad_ops = {
>>> .init_cfg = isc_scaler_init_cfg,
>>> };
>>>
>>> +static const struct media_entity_operations isc_scaler_entity_ops = {
>>> + .link_validate = v4l2_subdev_link_validate,
>>> +};
>>> +
>>> static const struct v4l2_subdev_ops xisc_scaler_subdev_ops = {
>>> .pad = &isc_scaler_pad_ops,
>>> };
>>> @@ -190,6 +194,7 @@ int isc_scaler_init(struct isc_device *isc)
>>>
>>> isc->scaler_sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>>> isc->scaler_sd.entity.function = MEDIA_ENT_F_PROC_VIDEO_SCALER;
>>> + isc->scaler_sd.entity.ops = &isc_scaler_entity_ops;
>>> isc->scaler_pads[ISC_SCALER_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
>>> isc->scaler_pads[ISC_SCALER_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
>>>
>>> diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
>>> index f98f25a55e73..5b0100c8c245 100644
>>> --- a/drivers/media/platform/atmel/atmel-isc.h
>>> +++ b/drivers/media/platform/atmel/atmel-isc.h
>>> @@ -63,15 +63,16 @@ struct isc_subdev_entity {
>>> * @cfa_baycfg: If this format is RAW BAYER, indicate the type of bayer.
>>> this is either BGBG, RGRG, etc.
>>> * @pfe_cfg0_bps: Number of hardware data lines connected to the ISC
>>> + * @raw: If the format is raw bayer.
>>> */
>>>
>>> struct isc_format {
>>> u32 fourcc;
>>> u32 mbus_code;
>>> u32 cfa_baycfg;
>>> -
>>> - bool sd_support;
>>> u32 pfe_cfg0_bps;
>>> +
>>> + bool raw;
>>> };
>>>
>>> /* Pipeline bitmap */
>>> @@ -216,8 +217,7 @@ enum isc_scaler_pads {
>>> * @comp: completion reference that signals frame completion
>>> *
>>> * @fmt: current v42l format
>>> - * @user_formats: list of formats that are supported and agreed with sd
>>> - * @num_user_formats: how many formats are in user_formats
>>> + * @try_fmt: current v4l2 try format
>>> *
>>> * @config: current ISC format configuration
>>> * @try_config: the current ISC try format , not yet activated
>>> @@ -272,6 +272,7 @@ enum isc_scaler_pads {
>>> * @formats_list_size: size of formats_list array
>>> * @pads: media controller pads for isc video entity
>>> * @mdev: media device that is registered by the isc
>>> + * @mpipe: media device pipeline used by the isc
>>> * @remote_pad: remote pad on the connected subdevice
>>> * @scaler_sd: subdevice for the scaler that isc registers
>>> * @scaler_pads: media controller pads for the scaler subdevice
>>> @@ -298,8 +299,7 @@ struct isc_device {
>>> struct completion comp;
>>>
>>> struct v4l2_format fmt;
>>> - struct isc_format **user_formats;
>>> - unsigned int num_user_formats;
>>> + struct v4l2_format try_fmt;
>>>
>>> struct fmt_config config;
>>> struct fmt_config try_config;
>>> @@ -369,6 +369,7 @@ struct isc_device {
>>> struct {
>>> struct media_pad pads[ISC_PADS_NUM];
>>> struct media_device mdev;
>>> + struct media_pipeline mpipe;
>>>
>>> u32 remote_pad;
>>> };
>>> diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
>>> index d96ee3373889..2a651e237193 100644
>>> --- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
>>> +++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
>>> @@ -80,20 +80,40 @@ static const struct isc_format sama5d2_controller_formats[] = {
>>> .fourcc = V4L2_PIX_FMT_Y10,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SBGGR8,
>>> + .raw = true,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SGBRG8,
>>> + .raw = true,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SGRBG8,
>>> + .raw = true,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SRGGB8,
>>> + .raw = true,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SBGGR10,
>>> + .raw = true,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SGBRG10,
>>> + .raw = true,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SGRBG10,
>>> + .raw = true,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SRGGB10,
>>> + .raw = true,
>>> + }, {
>>> + .fourcc = V4L2_PIX_FMT_SBGGR12,
>>> + .raw = true,
>>> + }, {
>>> + .fourcc = V4L2_PIX_FMT_SGBRG12,
>>> + .raw = true,
>>> + }, {
>>> + .fourcc = V4L2_PIX_FMT_SGRBG12,
>>> + .raw = true,
>>> + }, {
>>> + .fourcc = V4L2_PIX_FMT_SRGGB12,
>>> + .raw = true,
>>> },
>>> };
>>>
>>> diff --git a/drivers/media/platform/atmel/atmel-sama7g5-isc.c b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
>>> index e07ae188c15f..a0d60cfdba7b 100644
>>> --- a/drivers/media/platform/atmel/atmel-sama7g5-isc.c
>>> +++ b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
>>> @@ -89,20 +89,40 @@ static const struct isc_format sama7g5_controller_formats[] = {
>>> .fourcc = V4L2_PIX_FMT_Y16,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SBGGR8,
>>> + .raw = true,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SGBRG8,
>>> + .raw = true,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SGRBG8,
>>> + .raw = true,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SRGGB8,
>>> + .raw = true,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SBGGR10,
>>> + .raw = true,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SGBRG10,
>>> + .raw = true,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SGRBG10,
>>> + .raw = true,
>>> }, {
>>> .fourcc = V4L2_PIX_FMT_SRGGB10,
>>> + .raw = true,
>>> + }, {
>>> + .fourcc = V4L2_PIX_FMT_SBGGR12,
>>> + .raw = true,
>>> + }, {
>>> + .fourcc = V4L2_PIX_FMT_SGBRG12,
>>> + .raw = true,
>>> + }, {
>>> + .fourcc = V4L2_PIX_FMT_SGRBG12,
>>> + .raw = true,
>>> + }, {
>>> + .fourcc = V4L2_PIX_FMT_SRGGB12,
>>> + .raw = true,
>>> },
>>> };
>>>
>>
>
