On Fri, Apr 22, 2022 at 11:30:07AM PDT, Jonathan Neuschäfer wrote:
>In the WPCM450 SoC, the clocks for each timer can be gated individually.
>To prevent the timer 1 clock from being gated, enable it explicitly.
>
>Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
>---
> drivers/clocksource/timer-npcm7xx.c | 14 +++++++++++++-
> 1 file changed, 13 insertions(+), 1 deletion(-)
>
>diff --git a/drivers/clocksource/timer-npcm7xx.c b/drivers/clocksource/timer-npcm7xx.c
>index a00520cbb660a..974269b6b0c36 100644
>--- a/drivers/clocksource/timer-npcm7xx.c
>+++ b/drivers/clocksource/timer-npcm7xx.c
>@@ -188,17 +188,29 @@ static void __init npcm7xx_clocksource_init(void)
>
> static int __init npcm7xx_timer_init(struct device_node *np)
> {
>+ struct clk *clk;
> int ret;
>
> ret = timer_of_init(np, &npcm7xx_to);
>- if (ret)
>+ if (ret) {
>+ pr_warn("timer_of_init failed: %d\n", ret);
This seems like a somewhat opaque message to emit, especially given this
file's lack of a pr_fmt() definition -- maybe add a %pOF so it's
slightly easier to trace back to the device it stems from?
> return ret;
>+ }
>
> /* Clock input is divided by PRESCALE + 1 before it is fed */
> /* to the counter */
> npcm7xx_to.of_clk.rate = npcm7xx_to.of_clk.rate /
> (NPCM7XX_Tx_MIN_PRESCALE + 1);
>
>+ /* Enable the clock for timer1, if it exists */
>+ clk = of_clk_get(np, 1);
>+ if (clk) {
>+ if (!IS_ERR(clk))
>+ clk_prepare_enable(clk);
>+ else
>+ pr_warn("Failed to get clock for timer1: %pe", clk);
Likewise here (though to a slightly lesser extent).
>+ }
>+
> npcm7xx_clocksource_init();
> npcm7xx_clockevents_init();
>
>--
>2.35.1
>
