Re: [RFC/RFT v2 09/11] dt-bindings: pci: add lane-map to rockchip PCIe binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 26, 2022 at 03:21:37PM +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
> 
> Create new property for (rockchip) PCIe controller binding to
> define lane mapping.
> 
> Rockchip driver uses this for bifurcation (true/false) based
> on lanes should be splitted across controllers or not.
> 
> On rk3568 there are 2 PCIe Controllers which share 2 PCIe lanes.
> 
> pcie3x1: pcie@fe270000 //lane1 when using 1+1
> pcie3x2: pcie@fe280000 //lane0 when using 1+1
> 
> This ends up in one Controller (pcie3x1) uses lane-map = <0 1>; and
> the other lane-map = <1 0>; (pcie3x2)
> 
> This means there are 2 lanes (count of numbers), one (by position)
> is mapped to the first controller, the other one is used on the other
> controller.
> 
> In rockchip PCIe driver the lane-map is simply converted to the
> bifurcation bool instead of direct mapping a specific lane to a
> controller.
> 
> There is not yet any slot mapping below one controller.
> But for binding this may be possible like:
> 
> lane-map = <1 2 3 3 4 4 4 4>;
>             | | | ...
>         lane0 | |
>           lane1 |
>             lane2
> 
> on a 8-lane phy.
> 
> This can map lane0 to port1 (number used at this position),
> lane1 to port2, lanes 2+3 to port 3 and lanes 4,5,6,7 to port 4.
> 
> Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
> ---
> v2:
> - new patch
> ---
>  Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> index a992970e8b85..998b20b3a9dc 100644
> --- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> @@ -52,6 +52,8 @@ properties:
>        - const: pclk
>        - const: aux
>  
> +  lane-map: true
> +
>    msi-map: true
>  
>    num-lanes: true
> @@ -74,8 +76,6 @@ properties:
>    reset-names:
>      const: pipe
>  
> -  bifurcation: true
> -

Why are you adding "bifurcation" earlier in the series, then
immediately removing it?  Why not just add "lane-map" directly and
never mention "bifurcation" in the DT at all?

>    vpcie3v3-supply: true
>  
>  required:
> @@ -115,6 +115,7 @@ examples:
>                            "aclk_dbi", "pclk",
>                            "aux";
>              device_type = "pci";
> +            lane-map = <0 1>;
>              linux,pci-domain = <2>;
>              max-link-speed = <2>;
>              msi-map = <0x2000 &its 0x2000 0x1000>;
> -- 
> 2.25.1
> 
> 
> -- 
> linux-phy mailing list
> linux-phy@xxxxxxxxxxxxxxxxxxx
> https://lists.infradead.org/mailman/listinfo/linux-phy



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux