[PATCH 2/2] dt-bindings: phy: List supplies for qcom,edp-phy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We're supposed to list the supplies in the dt bindings but there are
none in the eDP PHY bindings.

Looking at the driver in Linux, I can see that there seem to be two
relevant supplies: "vdda-phy" and "vdda-pll". Let's add those to the
bindings.

NOTE: from looking at the Qualcomm datasheet for sc7280, it's not
immediately clear how to figure out how to fill in these supplies. The
only two eDP related supplies are simply described as "power for eDP
0.9V circuits" and "power for eDP 1.2V circuits". From guessing and
from comparing how a similar PHY is hooked up on other similar
Qualcomm boards, I'll make the educated guess that the 1.2V supply
goes to "vdda-phy" and the 0.9V supply goes to "vdda-pll" and I'll use
that in the example here.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---

 Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
index a5850ff529f8..cf9e9b8011cb 100644
--- a/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml
@@ -41,6 +41,9 @@ properties:
   "#phy-cells":
     const: 0
 
+  vdda-phy-supply: true
+  vdda-pll-supply: true
+
 required:
   - compatible
   - reg
@@ -65,5 +68,8 @@ examples:
 
       #clock-cells = <1>;
       #phy-cells = <0>;
+
+      vdda-phy-supply = <&vdd_a_edp_0_1p2>;
+      vdda-pll-supply = <&vdd_a_edp_0_0p9>;
     };
 ...
-- 
2.36.0.rc2.479.g8af0fa9b8e-goog




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux