Re: [PATCH V4 07/11] arm64: dts: imx8mq: Enable both G1 and G2 VPU's with vpu-blk-ctrl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Dienstag, dem 25.01.2022 um 11:11 -0600 schrieb Adam Ford:
> With the Hantro G1 and G2 now setup to run independently, update
> the device tree to allow both to operate.  This requires the
> vpu-blk-ctrl node to be configured.  Since vpu-blk-ctrl needs
> certain clock enabled to handle the gating of the G1 and G2
> fuses, the clock-parents and clock-rates for the various VPU's
> to be moved into the pgc_vpu because they cannot get re-parented
> once enabled, and the pgc_vpu is the highest in the chain.
> 
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> Reported-by: kernel test robot <lkp@xxxxxxxxx>
> Reviewed-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 2df2510d0118..549b2440f55d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -737,7 +737,21 @@ pgc_gpu: power-domain@5 {
>                                         pgc_vpu: power-domain@6 {
>                                                 #power-domain-cells =
> <0>;
>                                                 reg =
> <IMX8M_POWER_DOMAIN_VPU>;
> -                                               clocks = <&clk
> IMX8MQ_CLK_VPU_DEC_ROOT>;
> +                                               clocks = <&clk
> IMX8MQ_CLK_VPU_DEC_ROOT>,
> +                                                        <&clk
> IMX8MQ_CLK_VPU_G1_ROOT>,
> +                                                        <&clk
> IMX8MQ_CLK_VPU_G2_ROOT>;
> +                                               assigned-clocks =
> <&clk IMX8MQ_CLK_VPU_G1>,
> +                                                                
> <&clk IMX8MQ_CLK_VPU_G2>,
> +                                                                
> <&clk IMX8MQ_CLK_VPU_BUS>,
> +                                                                
> <&clk IMX8MQ_VPU_PLL_BYPASS>;
> +                                               assigned-clock-
> parents = <&clk IMX8MQ_VPU_PLL_OUT>,
> +                                                                    
>     <&clk IMX8MQ_VPU_PLL_OUT>,
> +                                                                    
>     <&clk IMX8MQ_SYS1_PLL_800M>,
> +                                                                    
>     <&clk IMX8MQ_VPU_PLL>;
> +                                               assigned-clock-rates
> = <600000000>,
> +                                                                    
>   <600000000>,
> +                                                                    
>   <800000000>,
> +                                                                    
>   <0>;
>                                         };
>  
>                                         pgc_disp: power-domain@7 {
> @@ -1457,30 +1471,31 @@ usb3_phy1: usb-phy@382f0040 {
>                         status = "disabled";
>                 };
>  
> -               vpu: video-codec@38300000 {
> -                       compatible = "nxp,imx8mq-vpu";
> -                       reg = <0x38300000 0x10000>,
> -                             <0x38310000 0x10000>,
> -                             <0x38320000 0x10000>;
> -                       reg-names = "g1", "g2", "ctrl";
> -                       interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> -                                    <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> -                       interrupt-names = "g1", "g2";
> +               vpu_g1: video-codec@38300000 {
> +                       compatible = "nxp,imx8mq-vpu-g1";
> +                       reg = <0x38300000 0x10000>;
> +                       interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
> +                       power-domains = <&vpu_blk_ctrl
> IMX8MQ_VPUBLK_PD_G1>;
> +               };
> +
> +               vpu_g2: video-codec@38310000 {
> +                       compatible = "nxp,imx8mq-vpu-g2";
> +                       reg = <0x38310000 0x10000>;
> +                       interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> +                       clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
> +                       power-domains = <&vpu_blk_ctrl
> IMX8MQ_VPUBLK_PD_G2>;
> +               };
> +
> +               vpu_blk_ctrl: blk-ctrl@38320000 {
> +                       compatible = "fsl,imx8mq-vpu-blk-ctrl";
> +                       reg = <0x38320000 0x100>;
> +                       power-domains = <&pgc_vpu>, <&pgc_vpu>,
> <&pgc_vpu>;
> +                       power-domain-names = "bus", "g1", "g2";
>                         clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
> -                                <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
> -                                <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
> -                       clock-names = "g1", "g2", "bus";
> -                       assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
> -                                         <&clk IMX8MQ_CLK_VPU_G2>,
> -                                         <&clk IMX8MQ_CLK_VPU_BUS>,
> -                                         <&clk
> IMX8MQ_VPU_PLL_BYPASS>;
> -                       assigned-clock-parents = <&clk
> IMX8MQ_VPU_PLL_OUT>,
> -                                                <&clk
> IMX8MQ_VPU_PLL_OUT>,
> -                                                <&clk
> IMX8MQ_SYS1_PLL_800M>,
> -                                                <&clk
> IMX8MQ_VPU_PLL>;
> -                       assigned-clock-rates = <600000000>,
> <600000000>,
> -                                              <800000000>, <0>;
> -                       power-domains = <&pgc_vpu>;
> +                                <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
> +                       clock-names = "g1", "g2";
> +                       #power-domain-cells = <1>;
>                 };
>  
>                 pcie0: pcie@33800000 {

With this update, when testing suspend to ram on imx8mq, I get:

buck4: failed to disable: -ETIMEDOUT

where buck4 is power-supply of pgc_vpu. And thus the transition to
suspend (and resuming) fails.

Have you tested system suspend after the imx8m-blk-ctrl update on
imx8mq?

thank you,

                                 martin




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux