Re: [PATCH v3 0/2] DSS: Add support for DisplayPort

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12:51-20220415, Vignesh Raghavendra wrote:
> 
> 
> On 06/04/22 10:28 pm, Rahul T R wrote:
> > The following series of patches enables DisplayPort on
> > j721e-evm
> > 
> > Tomi Valkeinen (2):
> >   arm64: dts: ti: k3-j721e-main: add DP & DP PHY
> >   arm64: dts: ti: k3-j721e-common-proc-board: add DP to j7 evm
> > 
> > v2:
> >    - use phandle with a parameter to refer clocks insted of
> >      sub nodes in serdes_wiz node
> >    - move phy link node to board DTS file
> > 
> > v3:
> >    - Fix the regulator node name as per the DT spec
> >    - Use Macro for GPIO type
> > 
> > boot logs:
> >    https://gist.githubusercontent.com/ravi-rahul/1bdbc3f77ab381e486c8394650c2e85d/raw/f04584c30181821c4ee83aee7781a9ba143cd3f3/j7_DP_upstream.log
> > 
> > kernel patch verify report:
> >    https://gist.githubusercontent.com/ravi-rahul/a982fef3fae03ec0dbdd5cb475a4cb25/raw/c8230370746e9878daf9527c3aa9d82eed7aa33c/report-kernel-patch-verify.txt
> 
> Hmm, With dtbs_check I see (on v5.18-rc1 tag)
> 
> +/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: ports: 'port@0' is a required property
> +/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: ports: 'port@4' is a required property
> +/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: 'phys' is a required property
> +/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: 'phy-names' is a required property
> 
> This goes away with 2/2 although adds:
> +<stdout>: Warning (graph_child_address): /bus@100000/dss@4a00000/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary
> 
> 
> Do we need to have empty ports node in j721e-main.dtsi for dp-bridge?   And something similar wrt phys as well?
> 
> Regards
> Vignesh

Hi Vignesh,

Thanks for the review!
Not sure why kernel patch verify did not catch this

I can fix the warnings for ports by adding empty ports in 1/2
For "phys" I can move the phy node from 2/2 to 1/2
But the commit will spill over both dtsi and dts files
is that okay, can you please give your inputs here

Regards
Rahul T R
 
> 
> > 
> >  .../dts/ti/k3-j721e-common-proc-board.dts     | 78 ++++++++++++++++++-
> >  arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 65 ++++++++++++++++
> >  2 files changed, 139 insertions(+), 4 deletions(-)
> > 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux