On 06/04/22 10:28 pm, Rahul T R wrote: > The following series of patches enables DisplayPort on > j721e-evm > > Tomi Valkeinen (2): > arm64: dts: ti: k3-j721e-main: add DP & DP PHY > arm64: dts: ti: k3-j721e-common-proc-board: add DP to j7 evm > > v2: > - use phandle with a parameter to refer clocks insted of > sub nodes in serdes_wiz node > - move phy link node to board DTS file > > v3: > - Fix the regulator node name as per the DT spec > - Use Macro for GPIO type > > boot logs: > https://gist.githubusercontent.com/ravi-rahul/1bdbc3f77ab381e486c8394650c2e85d/raw/f04584c30181821c4ee83aee7781a9ba143cd3f3/j7_DP_upstream.log > > kernel patch verify report: > https://gist.githubusercontent.com/ravi-rahul/a982fef3fae03ec0dbdd5cb475a4cb25/raw/c8230370746e9878daf9527c3aa9d82eed7aa33c/report-kernel-patch-verify.txt Hmm, With dtbs_check I see (on v5.18-rc1 tag) +/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: ports: 'port@0' is a required property +/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: ports: 'port@4' is a required property +/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: 'phys' is a required property +/workdir/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb: dp-bridge@a000000: 'phy-names' is a required property This goes away with 2/2 although adds: +<stdout>: Warning (graph_child_address): /bus@100000/dss@4a00000/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary Do we need to have empty ports node in j721e-main.dtsi for dp-bridge? And something similar wrt phys as well? Regards Vignesh > > .../dts/ti/k3-j721e-common-proc-board.dts | 78 ++++++++++++++++++- > arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 65 ++++++++++++++++ > 2 files changed, 139 insertions(+), 4 deletions(-) >
