The DA9062 can be used to power off a system if it is appropriately wired. Signed-off-by: Helmut Grohne <helmut.grohne@xxxxxxxxxx> --- Documentation/devicetree/bindings/mfd/da9062.txt | 1 + 1 file changed, 1 insertion(+) This series effectively is a rebased resend. The earlier posting was https://lore.kernel.org/all/20200107120613.GA746@laureti-dev/. Back then, this patch was Acked-by: Rob Herring, but I'm not including that ack here, because this patch required a non-trivial rebase. Helmut diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt index bab0d0e66cb3..4861c3ad97e9 100644 --- a/Documentation/devicetree/bindings/mfd/da9062.txt +++ b/Documentation/devicetree/bindings/mfd/da9062.txt @@ -41,6 +41,7 @@ further information on IRQ bindings. Optional properties: +- system-power-controller - gpio-controller : Marks the device as a gpio controller. - #gpio-cells : Should be two. The first cell is the pin number and the second cell is used to specify the gpio polarity. -- 2.20.1 Dipl.-Inf. Helmut Grohne Research and Development Application Engineering Phone: +49 (371) 24354 0 ∙ Fax: +49 (371) 24354 020 helmut.grohne@xxxxxxxxxx ∙ https://www.intenta.de Intenta GmbH ∙ Ahornstraße 55 ∙ 09112 Chemnitz, Germany Managing Director: Dr.-Ing. Basel Fardi ∙ VAT/USt-IdNr.: DE 275745394 Commercial register: HRB 26404 Amtsgericht Chemnitz
