From: Nick Hawkins <nick.hawkins@xxxxxxx> Changes since v4: *Fixed version mismatch with patchset across all patches *Fixed typos with ochi -> ohci echi -> ehci *Adjusted Watchdog Kconfig file *Adjusted various commit comments *Removed un-necessary include file *Updated outdated base revision to newer one to resolve merge conflicts as well as pickup vendor binding change for hpe. Changes since v3: *Completely redid the dtsi file to represent architecture *Reduced device tree size *Rewrote the timer driver to start the watchdog driver due to similar register region *Made adjustments to timer *Made adjustments to watchdog *Changed gxp.yaml to hpe,gxp.yaml with changes *Updated Maintainers to represent new file names *Added hpe bindings to generic-ehci and generic-ohci *Fixed clock architecture to be accurate Changes since v2: *Reduced size of changes, put them into patchset format *Changed from txt->yaml Changes since v1: *Fixed compiler warnings The GXP is the HPE BMC SoC that is used in the majority of HPE Generation 10 servers. Traditionally the asic will last multiple generations of server before being replaced. Info about SoC: HPE GXP is the name of the HPE Soc. This SoC is used to implement many BMC features at HPE. It supports ARMv7 architecture based on the Cortex A9 core. It is capable of using an AXI bus to which a memory controller is attached. It has multiple SPI interfaces to connect boot flash and BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It has multiple i2c engines to drive connectivity with a host infrastructure. The initial patches enable the watchdog and timer enabling the host to be able to boot. Nick Hawkins (11): archh: arm: mach-hpe: Introduce the HPE GXP architecture arch: arm: configs: multi_v7_defconfig drivers: wdt: Introduce HPE GXP SoC Watchdog clocksource/drivers: Add HPE GXP timer dt-bindings: timer: Add HPE GXP Timer Binding dt-bindings: watchdog: Add HPE GXP Watchdog timer binding dt-bindings: arm: Add HPE GXP Binding dt-bindings: usb: generic-ehci: Add HPE GXP ehci binding dt-bindings: usb: generic-ohci: Add HPE GXP ohci binding arch: arm: boot: dts: Introduce HPE GXP Device tree maintainers: Introduce HPE GXP Architecture .../devicetree/bindings/arm/hpe,gxp.yaml | 22 +++ .../bindings/timer/hpe,gxp-timer.yaml | 49 +++++ .../devicetree/bindings/usb/generic-ehci.yaml | 1 + .../devicetree/bindings/usb/generic-ohci.yaml | 1 + .../bindings/watchdog/hpe,gxp-wdt.yaml | 30 +++ MAINTAINERS | 13 ++ arch/arm/Kconfig | 2 + arch/arm/Makefile | 1 + arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/hpe-bmc-dl360gen10.dts | 13 ++ arch/arm/boot/dts/hpe-gxp.dtsi | 128 ++++++++++++ arch/arm/configs/multi_v7_defconfig | 3 + arch/arm/mach-hpe/Kconfig | 17 ++ arch/arm/mach-hpe/Makefile | 1 + arch/arm/mach-hpe/gxp.c | 16 ++ drivers/clocksource/Kconfig | 8 + drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-gxp.c | 182 ++++++++++++++++++ drivers/watchdog/Kconfig | 11 ++ drivers/watchdog/Makefile | 1 + drivers/watchdog/gxp-wdt.c | 166 ++++++++++++++++ 21 files changed, 668 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/hpe,gxp.yaml create mode 100644 Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml create mode 100644 Documentation/devicetree/bindings/watchdog/hpe,gxp-wdt.yaml create mode 100644 arch/arm/boot/dts/hpe-bmc-dl360gen10.dts create mode 100644 arch/arm/boot/dts/hpe-gxp.dtsi create mode 100644 arch/arm/mach-hpe/Kconfig create mode 100644 arch/arm/mach-hpe/Makefile create mode 100644 arch/arm/mach-hpe/gxp.c create mode 100644 drivers/clocksource/timer-gxp.c create mode 100644 drivers/watchdog/gxp-wdt.c -- 2.17.1
