On Thu, Apr 21, 2022 at 08:17:30PM +0530, Srinivasa Rao Mandadapu wrote:
> Enable rx, tx and va macro codecs and soundwire nodes for
> CRD rev5 (aka CRD 3.0/3.1) boards.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
> Co-developed-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
> Signed-off-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts | 35 +++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> index fd6eadc..d0794f2 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd.dts
> @@ -69,6 +69,19 @@ ap_ts_pen_1v8: &i2c13 {
> };
> };
>
> +&lpass_rx_macro {
> + status = "okay";
> +};
> +
> +&lpass_tx_macro {
> + status = "okay";
> +};
> +
> +&lpass_va_macro {
> + status = "okay";
> + vdd-micb-supply = <&vreg_bob>;
> +};
> +
> /* For nvme */
> &pcie1 {
> status = "okay";
> @@ -89,6 +102,28 @@ ap_ts_pen_1v8: &i2c13 {
> status = "okay";
> };
>
> +&swr0 {
> + status = "okay";
> +
> + wcd_rx: codec@0,4 {
> + compatible = "sdw20217010d00";
> + reg = <0 4>;
> + #sound-dai-cells = <1>;
> + qcom,rx-port-mapping = <1 2 3 4 5>;
> + };
> +};
> +
> +&swr1 {
> + status = "okay";
> +
> + wcd_tx: codec@0,3 {
> + compatible = "sdw20217010d00";
> + reg = <0 3>;
> + #sound-dai-cells = <1>;
> + qcom,tx-port-mapping = <1 2 3 4>;
> + };
> +};
The wcd9385 is on the qcard, so the wcd_tx/rx nodes should probably
be added to sc7280-qcard.dtsi, and the CRD DT would only set 'status'.
