On Thu, Apr 21, 2022 at 08:17:29PM +0530, Srinivasa Rao Mandadapu wrote:
> Subject: arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0 and CRD 2.0
This also enables things for IDP boards, right? If that isn't intended
then these changes should be in sc7280-crd-r3.dts
> Enable rx, tx and va macro codecs and soundwire nodes on revision 3
> and 4 (aka CRD 1.0 and 2.0) boards.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
> Co-developed-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
> Signed-off-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 35 ++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index 2f863c0..6cb5fc4 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -238,6 +238,19 @@
> modem-init;
> };
>
> +&lpass_rx_macro {
> + status = "okay";
> +};
> +
> +&lpass_tx_macro {
> + status = "okay";
> +};
> +
> +&lpass_va_macro {
> + status = "okay";
> + vdd-micb-supply = <&vreg_bob>;
> +};
> +
> &pcie1 {
> status = "okay";
> perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
> @@ -298,6 +311,28 @@
> cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
> };
>
> +&swr0 {
> + status = "okay";
> +
> + wcd_rx: codec@0,4 {
> + compatible = "sdw20217010d00";
> + reg = <0 4>;
> + #sound-dai-cells = <1>;
> + qcom,rx-port-mapping = <1 2 3 4 5>;
> + };
> +};
> +
> +&swr1 {
> + status = "okay";
> +
> + wcd_tx: codec@0,3 {
> + compatible = "sdw20217010d00";
> + reg = <0 3>;
> + #sound-dai-cells = <1>;
> + qcom,tx-port-mapping = <1 2 3 4>;
> + };
> +};
> +
> &uart5 {
> compatible = "qcom,geni-debug-uart";
> status = "okay";
> --
> 2.7.4
>
