Re: [PATCH RESEND v3 12/13] ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP13

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Gabriel

On 3/16/22 14:09, gabriel.fernandez@xxxxxxxxxxx wrote:
From: Gabriel Fernandez <gabriel.fernandez@xxxxxxxxxxx>

Enable optee and SCMI clocks support.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@xxxxxxxxxxx>
---
  arch/arm/boot/dts/stm32mp131.dtsi | 37 +++++++++++++++++++++++++++++++
  1 file changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
index 262de4eeb4ed..78eac53224d4 100644
--- a/arch/arm/boot/dts/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -27,6 +27,43 @@ arm-pmu {
  		interrupt-parent = <&intc>;
  	};
+ scmi_sram: sram@2ffff000 {
+		compatible = "mmio-sram";
+		reg = <0x2ffff000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x2ffff000 0x1000>;
+
+		scmi_shm: scmi_shm@0 {

rename to scmi-sram@0 to match with yaml description

+			compatible = "arm,scmi-shmem";
+			reg = <0 0x80>;
+		};
+	};

Can you move this sram node in Soc{ please?

+
+	firmware {
+		optee {
+			method = "smc";
+			compatible = "linaro,optee-tz";
+		};
+
+		scmi: scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+			shmem = <&scmi_shm>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
  	clocks {
  		clk_axi: clk-axi {
  			#clock-cells = <0>;




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux