Re: [PATCH v2 6/8] ARM: dts: r9a06g032: Add internal PCI bridge node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sergey,

On Mon, 18 Apr 2022 12:02:52 +0300
Sergey Shtylyov <s.shtylyov@xxxxxx> wrote:

> Hello!
> 
> On 4/14/22 10:40 AM, Herve Codina wrote:
> 
> > Add the device node for the r9a06g032 internal PCI bridge device.
> > 
> > Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx>
> > ---
> >  arch/arm/boot/dts/r9a06g032.dtsi | 28 ++++++++++++++++++++++++++++
> >  1 file changed, 28 insertions(+)
> > 
> > diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
> > index 636a6ab31c58..848dc034bb8c 100644
> > --- a/arch/arm/boot/dts/r9a06g032.dtsi
> > +++ b/arch/arm/boot/dts/r9a06g032.dtsi
> > @@ -211,6 +211,34 @@ gic: interrupt-controller@44101000 {
> >  			interrupts =
> >  				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
> >  		};
> > +
> > +		pci_usb: pci@40030000 {
> > +			compatible = "renesas,pci-r9a06g032", "renesas,pci-rzn1";
> > +			device_type = "pci";
> > +			clocks = <&sysctrl R9A06G032_HCLK_USBH>,
> > +				 <&sysctrl R9A06G032_HCLK_USBPM>,
> > +				 <&sysctrl R9A06G032_CLK_PCI_USB>;
> > +			clock-names = "hclk_usbh", "hclk_usbpm", "clk_pci_usb";
> > +			reg = <0x40030000 0xc00>,
> > +			      <0x40020000 0x1100>;
> > +			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> > +			status = "disabled";
> > +
> > +			bus-range = <0 0>;
> > +			#address-cells = <3>;
> > +			#size-cells = <2>;
> > +			#interrupt-cells = <1>;  
> 
>    Really? I don't think this PCI bridge is also an interrupt controller...

The #interrupt-cells property is required in the binding.
The #interrupt-cells is needed when we use interrupt-map property.

At least from 'make dtbindings_check':
	properties: '#interrupt-cells' is a dependency of 'interrupt-map'
	from schema $id: http://devicetree.org/meta-schemas/interrupts.yaml#

Do I miss something ?

Regards,
Hervé

> 
> > +			ranges = <0x02000000 0 0x40020000 0x40020000 0 0x00010000>;
> > +			/* Should map all possible DDR as inbound ranges, but
> > +			 * the IP only supports a 256MB, 512MB, or 1GB window.
> > +			 * flags, PCI addr (64-bit), CPU addr, PCI size (64-bit)
> > +			 */
> > +			dma-ranges = <0x42000000 0 0x80000000 0x80000000 0 0x40000000>;
> > +			interrupt-map-mask = <0xf800 0 0 0x7>;
> > +			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
> > +					 0x0800 0 0 1 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH
> > +					 0x1000 0 0 2 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> > +		};
> >  	};
> >  
> >  	timer {  
> 
> MBR, Sergey



-- 
Hervé Codina, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux