Re: [PATCH v2 2/8] dt-bindings: PCI: renesas-pci-usb: Convert bindings to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

On Thu, 14 Apr 2022 10:28:47 +0200
Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:

> Hi Hervé,
> 
> On Thu, Apr 14, 2022 at 9:40 AM Herve Codina <herve.codina@xxxxxxxxxxx> wrote:
> > Convert Renesas PCI bridge bindings documentation to json-schema.
> > Also name it 'renesas,pci-usb' as it is specifically used to
> > connect the PCI USB controllers to AHB bus.
> >
> > Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx>  
> 
> Thanks a lot for tackling this DT binding file!
> 
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/renesas,pci-usb.yaml
> > @@ -0,0 +1,134 @@
> > +# SPDX-License-Identifier: GPL-2.0  
> 
> scripts/checkpatch.pl says:
> WARNING: DT binding documents should be licensed (GPL-2.0-only OR BSD-2-Clause)

Right, changed to "GPL-2.0-only OR BSD-2-Clause"

> 
> > +  reg:
> > +    description: |
> > +      A list of physical regions to access the device. The first is
> > +      the operational registers for the OHCI/EHCI controllers and the
> > +      second is for the bridge configuration and control registers.
> > +    minItems: 2
> > +    maxItems: 2  
> 
> reg:
>   items:
>     - description: Operational registers for the OHCI/EHCI controllers.
>     - description: Bridge configuration and control registers.

Ok, changed.

> 
> > +
> > +  interrupts:
> > +    description: Interrupt for the device.  
> 
> maxItems: 1
> 
> The description is not needed.

Ok, changed.

> 
> > +
> > +  interrupt-map:
> > +    description: |
> > +      Standard property used to define the mapping of the PCI interrupts
> > +      to the GIC interrupts.
> > +
> > +  interrupt-map-mask:
> > +    description:
> > +      Standard property that helps to define the interrupt mapping.
> > +
> > +  clocks:
> > +    description: The reference to the device clock.  
> 
> maxItems: 1
> 
> The description is not needed.

Ok, changed

> 
> Missing "resets" and "power-domains" properties.
> 
> Missing description of the child nodes.

"resets", "power-domains" dans child nodes added

> 
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - interrupt-map
> > +  - interrupt-map-mask
> > +  - clocks  
> 
> Missing "resets" and "power-domains".

Added

> 
> > +  - bus-range
> > +  - "#address-cells"
> > +  - "#size-cells"
> > +  - "#interrupt-cells"
> > +
> > +unevaluatedProperties: false  
> 
> Why doesn't "make dtbs_check" complain about the presence of
> e.g. "resets" in the actual DTS files?
> 
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
> > +
> > +    bus {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;  
> 
> I think you should drop this (and the corresponding high addresses
> below).
> 

Ok

> > +
> > +        pci0: pci@ee090000  {
> > +            compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
> > +            device_type = "pci";
> > +            clocks = <&cpg CPG_MOD 703>;
> > +            reg = <0 0xee090000 0 0xc00>,
> > +                  <0 0xee080000 0 0x1100>;
> > +            interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;  
> 
>                         power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
>                         resets = <&cpg 703>;

Ok

> 
> > +            status = "disabled";
> > +
> > +            bus-range = <0 0>;
> > +            #address-cells = <3>;
> > +            #size-cells = <2>;
> > +            #interrupt-cells = <1>;
> > +            ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
> > +            dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
> > +            interrupt-map-mask = <0xf800 0 0 0x7>;
> > +            interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> > +                            <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> > +                            <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > +            usb@1,0 {
> > +                reg = <0x800 0 0 0 0>;
> > +                phys = <&usb0 0>;
> > +                phy-names = "usb";
> > +            };
> > +  
> 
> ERROR: trailing whitespace
> #249: FILE: Documentation/devicetree/bindings/pci/renesas,pci-usb.yaml:127:
> +            $

Ok

> 
> > +            usb@2,0 {
> > +                reg = <0x1000 0 0 0 0>;
> > +                phys = <&usb0 0>;
> > +                phy-names = "usb";
> > +            };
> > +        };
> > +    };  
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds

Thanks for the review,
Hervé

-- 
Hervé Codina, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux