Hi Krzysztof On 4/7/22 16:30, Krzysztof Kozlowski wrote:
The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> --- arch/arm/boot/dts/da850-evm.dts | 2 +- arch/arm/boot/dts/dm8168-evm.dts | 2 +- arch/arm/boot/dts/spear1310-evb.dts | 2 +- arch/arm/boot/dts/spear1340-evb.dts | 2 +- arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi | 2 +- arch/arm/boot/dts/stm32mp157c-ev1.dts | 4 ++-- 6 files changed, 7 insertions(+), 7 deletions(-)
Thanks for your patch. Is it possible to split it per vendor (TI/STM32/SPEAR) ?
Thanks Alex
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 87c517d65f62..e9aecac4f5b5 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -278,7 +278,7 @@ &spi1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&spi1_pins &spi1_cs0_pin>; - flash: m25p80@0 { + flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "jedec,spi-nor"; diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts index 5126e2d72ed7..778796c10af8 100644 --- a/arch/arm/boot/dts/dm8168-evm.dts +++ b/arch/arm/boot/dts/dm8168-evm.dts @@ -177,7 +177,7 @@ &mcspi1 { pinctrl-names = "default"; pinctrl-0 = <&mcspi1_pins>;- m25p80@0 {+ flash@0 { compatible = "w25x32"; spi-max-frequency = <48000000>; reg = <0>; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 4cbadcb41084..ddd1cf4d0554 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -379,7 +379,7 @@ stmpe_touchscreen { }; };- m25p80@1 {+ flash@1 { compatible = "st,m25p80"; reg = <1>; spi-max-frequency = <12000000>; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index fd194ebeedc9..3a51a41eb5e4 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -439,7 +439,7 @@ spi0: spi@e0100000 { cs-gpios = <&gpiopinctrl 80 0>, <&gpiopinctrl 24 0>, <&gpiopinctrl 85 0>;- m25p80@0 {+ flash@0 { compatible = "m25p80"; reg = <0>; spi-max-frequency = <12000000>; diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi index 33ae5e0590df..ac53ee3c496b 100644 --- a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi @@ -398,7 +398,7 @@ &qspi { #size-cells = <0>; status = "okay";- flash0: is25lp016d@0 {+ flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <133000000>; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index e222d2d2cb44..d142dd30e16b 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -262,7 +262,7 @@ &qspi { #size-cells = <0>; status = "okay";- flash0: mx66l51235l@0 {+ flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; @@ -271,7 +271,7 @@ flash0: mx66l51235l@0 { #size-cells = <1>; };- flash1: mx66l51235l@1 {+ flash1: flash@1 { compatible = "jedec,spi-nor"; reg = <1>; spi-rx-bus-width = <4>;
