Re: [PATCH 1/2] dt-binding: Add cypress,cy8c95x0 binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/04/2022 09:15, Patrick Rudolph wrote:
> Added device tree binding documentation for
> Cypress CY8C95x0 I2C pin-controller.
> 

Thank you for your patch. There is something to discuss/improve.

(...)

> +  reg:
> +    maxItems: 1
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    description:
> +      The first cell is the pin number and the second cell is used
> +      to specify optional parameters.
> +    const: 2
> +
> +  gpio-reserved-ranges: true
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    description:
> +      Specifies the pin number and flags, as defined in
> +      include/dt-bindings/interrupt-controller/irq.h

Skip description, it's obvious.

> +    const: 2
> +
> +  ngpios:
> +    minimum: 1
> +    maximum: 60
> +
> +  gpio-line-names:
> +    minItems: 1
> +    maxItems: 60
> +
> +  vdd-supply:
> +    description:
> +      Optional power supply.
> +
> +patternProperties:
> +  '-pins$':
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          oneOf:

Why do you need oneOf here?

> +            - pattern: "^gp([0-7][0-7])$"
> +        minItems: 1
> +        maxItems: 60
> +
> +      function:
> +        enum: [ gpio, pwm ]
> +

No need for blank line. In other cases you put description before the
property constraints, so do it consistently here as well.

> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins.
> +
> +      bias-pull-down: true
> +
> +      bias-pull-up: true
> +
> +      bias-disable: true
> +
> +      output-high: true
> +
> +      output-low: true
> +
> +      drive-push-pull: true
> +
> +      drive-open-drain: true
> +
> +      drive-open-source: true
> +
> +    required:
> +      - pins
> +      - function
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +  - gpio-controller
> +  - '#gpio-cells'

no allOf referencing pinctrl.yaml? Include it unless there is some
reason not to.

Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux