From: David Jander <david@xxxxxxxxxxx>
Add missing ISB led node.
Signed-off-by: David Jander <david@xxxxxxxxxxx>
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index 2a86136a04e8..c928bd854e92 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -95,6 +95,13 @@ led-2 {
gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
+
+ led-3 {
+ label = "isb_led";
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
};
reg_1v8: regulator-1v8 {
@@ -574,6 +581,8 @@ MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0
MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0
/* POWER_LED */
MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0
+ /* ISB_LED */
+ MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0
>;
};
--
2.30.2
