[PATCH v3 1/4] dt-bindings: phy: qcom,qmp: Mark '#clock-cells' as a 'optional' property

[Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>]

'#clock-cells' is not a required property for qmp-phy(s) in the
'/' node, but it should be is used in 'phy@' subnode (where it is
actually a 'required' property). Fix the same.

This also fixes the following 'make dtbs_check' warning(s):

sm8350-microsoft-surface-duo2.dt.yaml: phy@1d87000:
  '#clock-cells' is a required property

Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Vinod Koul <vkoul@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index 8b850c5ab116..c39ead81ecd7 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -66,9 +66,6 @@ properties:
       - description: Address and length of PHY's common serdes block.
       - description: Address and length of PHY's DP_COM control block.
 
-  "#clock-cells":
-    enum: [ 1, 2 ]
-
   "#address-cells":
     enum: [ 1, 2 ]
 
@@ -112,11 +109,13 @@ patternProperties:
     description:
       Each device node of QMP phy is required to have as many child nodes as
       the number of lanes the PHY has.
+    properties:
+      "#clock-cells":
+        enum: [ 0, 1, 2 ]
 
 required:
   - compatible
   - reg
-  - "#clock-cells"
   - "#address-cells"
   - "#size-cells"
   - ranges
@@ -468,7 +467,6 @@ examples:
     usb_2_qmpphy: phy-wrapper@88eb000 {
         compatible = "qcom,sdm845-qmp-usb3-uni-phy";
         reg = <0x088eb000 0x18c>;
-        #clock-cells = <1>;
         #address-cells = <1>;
         #size-cells = <1>;
         ranges = <0x0 0x088eb000 0x2000>;
-- 
2.35.1