From: Suman Anna <s-anna@xxxxxx> Add two new generic API pruss_cfg_read() and pruss_cfg_update() to the PRUSS platform driver to allow other drivers to read and program respectively a register within the PRUSS CFG sub-module represented by a syscon driver. This interface provides a simple way for client drivers without having them to include and parse the CFG syscon node within their respective device nodes. Various useful registers and macros for certain register bit-fields and their values have also been added. It is the responsibility of the client drivers to reconfigure or reset a particular register upon any failures. Signed-off-by: Suman Anna <s-anna@xxxxxx> Co-developed-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@xxxxxxxxxx> Signed-off-by: Puranjay Mohan <p-mohan@xxxxxx> --- drivers/soc/ti/pruss.c | 41 +++++++++++++++++ include/linux/pruss.h | 102 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 143 insertions(+) diff --git a/drivers/soc/ti/pruss.c b/drivers/soc/ti/pruss.c index 95c0cbd7c52f..bf5471c4fa33 100644 --- a/drivers/soc/ti/pruss.c +++ b/drivers/soc/ti/pruss.c @@ -164,6 +164,47 @@ int pruss_release_mem_region(struct pruss *pruss, } EXPORT_SYMBOL_GPL(pruss_release_mem_region); +/** + * pruss_cfg_read() - read a PRUSS CFG sub-module register + * @pruss: the pruss instance handle + * @reg: register offset within the CFG sub-module + * @val: pointer to return the value in + * + * Reads a given register within the PRUSS CFG sub-module and + * returns it through the passed-in @val pointer + * + * Return: 0 on success, or an error code otherwise + */ +int pruss_cfg_read(struct pruss *pruss, unsigned int reg, unsigned int *val) +{ + if (IS_ERR_OR_NULL(pruss)) + return -EINVAL; + + return regmap_read(pruss->cfg_regmap, reg, val); +} +EXPORT_SYMBOL_GPL(pruss_cfg_read); + +/** + * pruss_cfg_update() - configure a PRUSS CFG sub-module register + * @pruss: the pruss instance handle + * @reg: register offset within the CFG sub-module + * @mask: bit mask to use for programming the @val + * @val: value to write + * + * Programs a given register within the PRUSS CFG sub-module + * + * Return: 0 on success, or an error code otherwise + */ +int pruss_cfg_update(struct pruss *pruss, unsigned int reg, + unsigned int mask, unsigned int val) +{ + if (IS_ERR_OR_NULL(pruss)) + return -EINVAL; + + return regmap_update_bits(pruss->cfg_regmap, reg, mask, val); +} +EXPORT_SYMBOL_GPL(pruss_cfg_update); + static void pruss_of_free_clk_provider(void *data) { struct device_node *clk_mux_np = data; diff --git a/include/linux/pruss.h b/include/linux/pruss.h index 689ef243bcbc..eb2f974eef9c 100644 --- a/include/linux/pruss.h +++ b/include/linux/pruss.h @@ -10,12 +10,99 @@ #ifndef __LINUX_PRUSS_H #define __LINUX_PRUSS_H +#include <linux/bits.h> #include <linux/device.h> #include <linux/err.h> #include <linux/types.h> #define PRU_RPROC_DRVNAME "pru-rproc" +/* + * PRU_ICSS_CFG registers + * SYSCFG, ISRP, ISP, IESP, IECP, SCRP applicable on AMxxxx devices only + */ +#define PRUSS_CFG_REVID 0x00 +#define PRUSS_CFG_SYSCFG 0x04 +#define PRUSS_CFG_GPCFG(x) (0x08 + (x) * 4) +#define PRUSS_CFG_CGR 0x10 +#define PRUSS_CFG_ISRP 0x14 +#define PRUSS_CFG_ISP 0x18 +#define PRUSS_CFG_IESP 0x1C +#define PRUSS_CFG_IECP 0x20 +#define PRUSS_CFG_SCRP 0x24 +#define PRUSS_CFG_PMAO 0x28 +#define PRUSS_CFG_MII_RT 0x2C +#define PRUSS_CFG_IEPCLK 0x30 +#define PRUSS_CFG_SPP 0x34 +#define PRUSS_CFG_PIN_MX 0x40 + +/* PRUSS_GPCFG register bits */ +#define PRUSS_GPCFG_PRU_GPO_SH_SEL BIT(25) + +#define PRUSS_GPCFG_PRU_DIV1_SHIFT 20 +#define PRUSS_GPCFG_PRU_DIV1_MASK GENMASK(24, 20) + +#define PRUSS_GPCFG_PRU_DIV0_SHIFT 15 +#define PRUSS_GPCFG_PRU_DIV0_MASK GENMASK(15, 19) + +#define PRUSS_GPCFG_PRU_GPO_MODE BIT(14) +#define PRUSS_GPCFG_PRU_GPO_MODE_DIRECT 0 +#define PRUSS_GPCFG_PRU_GPO_MODE_SERIAL BIT(14) + +#define PRUSS_GPCFG_PRU_GPI_SB BIT(13) + +#define PRUSS_GPCFG_PRU_GPI_DIV1_SHIFT 8 +#define PRUSS_GPCFG_PRU_GPI_DIV1_MASK GENMASK(12, 8) + +#define PRUSS_GPCFG_PRU_GPI_DIV0_SHIFT 3 +#define PRUSS_GPCFG_PRU_GPI_DIV0_MASK GENMASK(7, 3) + +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_POSITIVE 0 +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE_NEGATIVE BIT(2) +#define PRUSS_GPCFG_PRU_GPI_CLK_MODE BIT(2) + +#define PRUSS_GPCFG_PRU_GPI_MODE_MASK GENMASK(1, 0) +#define PRUSS_GPCFG_PRU_GPI_MODE_SHIFT 0 + +#define PRUSS_GPCFG_PRU_MUX_SEL_SHIFT 26 +#define PRUSS_GPCFG_PRU_MUX_SEL_MASK GENMASK(29, 26) + +/* PRUSS_MII_RT register bits */ +#define PRUSS_MII_RT_EVENT_EN BIT(0) + +/* PRUSS_SPP register bits */ +#define PRUSS_SPP_XFER_SHIFT_EN BIT(1) +#define PRUSS_SPP_PRU1_PAD_HP_EN BIT(0) + +/* + * enum pruss_gp_mux_sel - PRUSS GPI/O Mux modes for the + * PRUSS_GPCFG0/1 registers + * + * NOTE: The below defines are the most common values, but there + * are some exceptions like on 66AK2G, where the RESERVED and MII2 + * values are interchanged. Also, this bit-field does not exist on + * AM335x SoCs + */ +enum pruss_gp_mux_sel { + PRUSS_GP_MUX_SEL_GP = 0, + PRUSS_GP_MUX_SEL_ENDAT, + PRUSS_GP_MUX_SEL_RESERVED, + PRUSS_GP_MUX_SEL_SD, + PRUSS_GP_MUX_SEL_MII2, + PRUSS_GP_MUX_SEL_MAX, +}; + +/* + * enum pruss_gpi_mode - PRUSS GPI configuration modes, used + * to program the PRUSS_GPCFG0/1 registers + */ +enum pruss_gpi_mode { + PRUSS_GPI_MODE_DIRECT = 0, + PRUSS_GPI_MODE_PARALLEL, + PRUSS_GPI_MODE_28BIT_SHIFT, + PRUSS_GPI_MODE_MII, +}; + /* * enum pruss_pru_id - PRU core identifiers */ @@ -73,6 +160,9 @@ int pruss_request_mem_region(struct pruss *pruss, enum pruss_mem mem_id, struct pruss_mem_region *region); int pruss_release_mem_region(struct pruss *pruss, struct pruss_mem_region *region); +int pruss_cfg_read(struct pruss *pruss, unsigned int reg, unsigned int *val); +int pruss_cfg_update(struct pruss *pruss, unsigned int reg, + unsigned int mask, unsigned int val); #else @@ -96,6 +186,18 @@ static inline int pruss_release_mem_region(struct pruss *pruss, return -EOPNOTSUPP; } +static inline int pruss_cfg_read(struct pruss *pruss, unsigned int reg, + unsigned int *val) +{ + return -EOPNOTSUPP; +} + +static inline int pruss_cfg_update(struct pruss *pruss, unsigned int reg, + unsigned int mask, unsigned int val) +{ + return -EOPNOTSUPP; +} + #endif /* CONFIG_TI_PRUSS */ #if IS_ENABLED(CONFIG_PRU_REMOTEPROC) -- 2.17.1