On 4/15/2022 5:40 AM, Stephen Boyd wrote:
Quoting Satya Priya (2022-04-14 05:30:13)
diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
index c472d7f..97a72da 100644
--- a/drivers/mfd/qcom-pm8008.c
+++ b/drivers/mfd/qcom-pm8008.c
@@ -239,6 +241,13 @@ static int pm8008_probe(struct i2c_client *client)
dev_err(chip->dev, "Failed to probe irq periphs: %d\n", rc);
}
+ chip->reset_gpio = devm_gpiod_get(chip->dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(chip->reset_gpio)) {
+ dev_err(chip->dev, "failed to acquire reset gpio\n");
The API looks to print debug messages. This print doesn't look required.
Okay.
+ return PTR_ERR(chip->reset_gpio);
+ }
+ gpiod_set_value(chip->reset_gpio, 1);
Does this do anything? Does this work just as well?
reset_gpio = devm_gpiod_get(chip->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(reset_gpio))
return PTR_ERR(reset_gpio);
Note that there's no point to store the reset gpio in the structure if
it won't be used outside of probe.
Okay, I'll use a local variable.
This should work fine? I used
GPIOD_OUT_LOW to indicate that the reset should be returned to this
function deasserted, i.e. taking the PMIC out of reset.
I'll try this out.
