> -----Original Message-----
> From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
> Sent: Thursday, April 14, 2022 2:40 PM
> To: Leo Li <leoyang.li@xxxxxxx>
> Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>; Z.Q. Hou
> <zhiqiang.hou@xxxxxxx>; Rob Herring <robh@xxxxxxxxxx>; linux-
> pci@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v3 4/4] dt-bindings: pci: layerscape-pci: define AER/PME
> interrupts
>
> On Fri, Mar 11, 2022 at 05:49:38PM -0600, Li Yang wrote:
> > Different platforms using this controller are using different numbers
> > of interrupt lines and the routing of events to these interrupt lines
> > are different too. So instead of trying to define names for these
> > interrupt lines, we define the more specific AER/PME events that are
> > routed to these interrupt lines.
> >
> > For platforms which only has a single interrupt line for miscellaneous
> > controller events, we can keep using the original "intr" name for
> > backward compatibility.
> >
> > Also change the example from ls1021a to ls1088a for better representation.
> >
> > Signed-off-by: Li Yang <leoyang.li@xxxxxxx>
> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
>
> 1) Please pay attention to your subject lines and make them match.
> In this series you have:
>
> dt-bindings: pci: layerscape-pci: Add a optional property big-endian
> dt-bindings: pci: layerscape-pci: Update the description of SCFG property
> dt-bindings: pci: layerscape-pci: Add EP mode compatible strings for ls1028a
> dt-bindings: pci: layerscape-pci: define AER/PME interrupt
>
> Note that all are capitalized except "define AER/PME interrupt".
>
> 2) Also capitalize "AER" in the comment below so it matches usage in the
> commit log and the property descriptions.
Thanks for the suggestion.
>
> 3) This diff is HUGE because you replace a bunch of tabs with spaces.
> That seems like a pointless change, but if you want to do it, at least do it in a
> separate patch all by itself that *only* changes tabs to spaces. Then we'll be
> able to see what actually happened in the patch that adds the properties.
Right. I changed to use space because the examples in yaml bindings do require space instead of tab. But it is not really necessary now as this binding has not been converted to yaml yet.
>
> This has already been merged, so unless you need to update this series for
> some other reason, these are just tips for the future.
>
> > ---
> > .../bindings/pci/layerscape-pci.txt | 58 ++++++++++---------
> > 1 file changed, 32 insertions(+), 26 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > index 8fd6039a826b..ee8a4791a78b 100644
> > --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > @@ -31,8 +31,14 @@ Required properties:
> > - reg: base addresses and lengths of the PCIe controller register blocks.
> > - interrupts: A list of interrupt outputs of the controller. Must contain an
> > entry for each entry in the interrupt-names property.
> > -- interrupt-names: Must include the following entries:
> > - "intr": The interrupt that is asserted for controller interrupts
> > +- interrupt-names: It could include the following entries:
> > + "aer": Used for interrupt line which reports AER events when
> > + non MSI/MSI-X/INTx mode is used
> > + "pme": Used for interrupt line which reports PME events when
> > + non MSI/MSI-X/INTx mode is used
> > + "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
> > + which has a single interrupt line for miscellaneous controller
> > + events(could include AER and PME events).
> > - fsl,pcie-scfg: Must include two entries.
> > The first entry must be a link to the SCFG device node
> > The second entry is the physical PCIe controller index starting from '0'.
> > @@ -47,27 +53,27 @@ Optional properties:
> >
> > Example:
> >
> > - pcie@3400000 {
> > - compatible = "fsl,ls1021a-pcie";
> > - reg = <0x00 0x03400000 0x0 0x00010000 /* controller
> registers */
> > - 0x40 0x00000000 0x0 0x00002000>; /* configuration space
> */
> > - reg-names = "regs", "config";
> > - interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /*
> controller interrupt */
> > - interrupt-names = "intr";
> > - fsl,pcie-scfg = <&scfg 0>;
> > - #address-cells = <3>;
> > - #size-cells = <2>;
> > - device_type = "pci";
> > - dma-coherent;
> > - num-lanes = <4>;
> > - bus-range = <0x0 0xff>;
> > - ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0
> 0x00010000 /* downstream I/O */
> > - 0xc2000000 0x0 0x20000000 0x40 0x20000000 0x0
> 0x20000000 /* prefetchable memory */
> > - 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0
> 0x40000000>; /* non-prefetchable memory */
> > - #interrupt-cells = <1>;
> > - interrupt-map-mask = <0 0 0 7>;
> > - interrupt-map = <0000 0 0 1 &gic GIC_SPI 91
> IRQ_TYPE_LEVEL_HIGH>,
> > - <0000 0 0 2 &gic GIC_SPI 188
> IRQ_TYPE_LEVEL_HIGH>,
> > - <0000 0 0 3 &gic GIC_SPI 190
> IRQ_TYPE_LEVEL_HIGH>,
> > - <0000 0 0 4 &gic GIC_SPI 192
> IRQ_TYPE_LEVEL_HIGH>;
> > - };
> > + pcie@3400000 {
> > + compatible = "fsl,ls1088a-pcie";
> > + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers
> */
> > + <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
> > + reg-names = "regs", "config";
> > + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
> > + interrupt-names = "aer";
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + device_type = "pci";
> > + dma-coherent;
> > + num-viewport = <256>;
> > + bus-range = <0x0 0xff>;
> > + ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0
> 0x00010000 /* downstream I/O */
> > + 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0
> 0x40000000>; /* non-prefetchable memory */
> > + msi-parent = <&its>;
> > + #interrupt-cells = <1>;
> > + interrupt-map-mask = <0 0 0 7>;
> > + interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
> > + <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
> > + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
> > + };
> > --
> > 2.25.1
> >
