[PATCH 6/7] arm64: dts: renesas: r8a779f0: Add UFS node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add UFS node for R-Car S4-8 (r8a779f0).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/renesas/r8a779f0.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
index b0241aa29fc8..8bf418a4232f 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -40,6 +40,13 @@ extalr_clk: extalr {
 		clock-frequency = <0>;
 	};
 
+	ufs30_clk: ufs30_refclk_v {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
 	pmu_a55 {
 		compatible = "arm,cortex-a55-pmu";
 		interrupts-extended = <&gic GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
@@ -258,6 +265,18 @@ i2c5: i2c@e66e0000 {
 			status = "disabled";
 		};
 
+		ufs: scsi@e6860000 {
+			compatible = "renesas,r8a779f0-ufs";
+			reg = <0 0xe6860000 0 0x100>;
+			interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1514>, <&ufs30_clk>;
+			clock-names = "fck", "ref_clk";
+			freq-table-hz = <200000000 200000000>, <38400000 38400000>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 1514>;
+			status = "disabled";
+		};
+
 		scif3: serial@e6c50000 {
 			compatible = "renesas,scif-r8a779f0",
 				     "renesas,rcar-gen4-scif", "renesas,scif";
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux