sm8250 has two CCI busses with two I2C busses apiece. Co-developed-by: Julian Grahsl <jgrahsl@xxxxxxxx> Signed-off-by: Julian Grahsl <jgrahsl@xxxxxxxx> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 82 ++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 91ed079edbf7..98e96527702b 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -3150,6 +3150,88 @@ videocc: clock-controller@abf0000 { #power-domain-cells = <1>; }; + cci0: cci@ac4f000 { + compatible = "qcom,sm8250-cci"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0x0ac4f000 0 0x1000>; + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>, + <&camcc CAM_CC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-1 = <&cci0_sleep &cci1_sleep>; + + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac50000 { + compatible = "qcom,sm8250-cci"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0x0ac50000 0 0x1000>; + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>, + <&camcc CAM_CC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cci2_default &cci3_default>; + pinctrl-1 = <&cci2_sleep &cci3_sleep>; + + status = "disabled"; + + cci_i2c2: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci_i2c3: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + camss: camss@ac6a000 { compatible = "qcom,sm8250-camss"; status = "disabled"; -- 2.35.1