This series adds support for the picoPHY usb phy which is used by the usb2
and usb3 host controllers when controlling usb2/1.1 devices. It is found on
stih407 family SoC's from the consumer electronics devision of STMicroelectronics.
Changes since v2:
- Remove .data and hardcode phy ops in devm_phy_create call (arndb)
- Add COMPILE_TEST in kconfig (arndb)
- Add depends on RESET_CONTROLLER in kconfig so COMPILE_TEST works
- select GENERIC_PHY instead of depends on (Bartlomiej)
Changes since v1:
- Remove reference to stih410 in dt documentation (kishon)
- Fix alignment issue in dt example (kishon)
- usbpicophy@f8 since you have a reg property (kishon)
- Enable driver in multi_v7_defconfig
Peter Griffin (4):
phy: phy-stih407-usb: Add usb picoPHY driver found on stih407 SoC
family
phy: phy-stih407-usb: Add dt documentation for USB picophy found on
stih407 SoC family
MAINTAINERS: Add phy-stih407-usb.c file to ARCH/STI architecture
ARM: multi_v7_defconfig: Enable stih407 usb picophy
.../devicetree/bindings/phy/phy-stih407-usb.txt | 30 ++++
MAINTAINERS | 1 +
arch/arm/configs/multi_v7_defconfig | 1 +
drivers/phy/Kconfig | 9 ++
drivers/phy/Makefile | 2 +
drivers/phy/phy-stih407-usb.c | 177 +++++++++++++++++++++
6 files changed, 220 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
create mode 100644 drivers/phy/phy-stih407-usb.c
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
