Some 32-bit (ARMv7) systems are architected like this: * The firmware doesn't know and doesn't care about hypervisor mode and we don't want to add the complexity of hypervisor there. * The firmware isn't involved in SMP bringup or resume. * The ARCH timer come up with an uninitialized offset between the virtual and physical counters. Each core gets a different random offset. * The device boots in "Secure SVC" mode. * Nothing has touched the reset value of CNTHCTL.PL1PCEN or CNTHCTL.PL1PCTEN (both default to 1 at reset) On systems like the above, it doesn't make sense to use the virtual counter. There's nobody managing the offset and each time a core goes down and comes back up it will get reinitialized to some other random value. Let's add a property to the device tree to say that we shouldn't use the virtual timer. Firmware could potentially remove this property before passing the device tree to the kernel if it really wants the kernel to use a virtual timer. Note that it's been said that ARM64 (ARMv8) systems the firmware and kernel really can't be architected as described above. That means using the physical timer like this really only makes sense for ARMv7 systems. In order for this patch to do anything useful, we also need Sonny's patch at <https://patchwork.kernel.org/patch/4790921/> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx> Signed-off-by: Sonny Rao <sonnyrao@xxxxxxxxxxxx> --- Changes in v3: - Wording changes to bindings and patch desc as per Will Deacon Changes in v2: - Add "#ifdef CONFIG_ARM" as per Will Deacon Documentation/devicetree/bindings/arm/arch_timer.txt | 6 ++++++ drivers/clocksource/arm_arch_timer.c | 5 +++++ 2 files changed, 11 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt index 37b2caf..e28fced 100644 --- a/Documentation/devicetree/bindings/arm/arch_timer.txt +++ b/Documentation/devicetree/bindings/arm/arch_timer.txt @@ -22,6 +22,12 @@ to deliver its interrupts via SPIs. - always-on : a boolean property. If present, the timer is powered through an always-on power domain, therefore it never loses context. +** Optional properties: + +- arm,use-physical-timer : Don't ever use the virtual timer, just use the + physical one. Only supported for ARM (not ARM64). + + Example: timer { diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 5163ec1..e7aa256 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -649,6 +649,11 @@ static void __init arch_timer_init(struct device_node *np) arch_timer_ppi[i] = irq_of_parse_and_map(np, i); arch_timer_detect_rate(NULL, np); +#ifdef CONFIG_ARM + if (of_property_read_bool(np, "arm,use-physical-timer")) + arch_timer_use_virtual = false; +#endif + /* * If HYP mode is available, we know that the physical timer * has been configured to be accessible from PL1. Use it, so -- 2.1.0.rc2.206.gedb03e5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
