Hi,
On 11/09/14 09:40, Markus Pargmann wrote:
On Wed, Sep 10, 2014 at 11:14:15AM -0700, Nicolin Chen wrote:
On Wed, Sep 10, 2014 at 7:27 AM, Markus Pargmann <mpa@xxxxxxxxxxxxxx> wrote:
Hi,
On Wed, Sep 10, 2014 at 04:46:46PM +0300, Dmitry Lavnikevich wrote:
This is driver for i.MX6 boards with tlv320aic3x audio codecs.
Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@xxxxxxxxxxxxxxxxx>
---
.../bindings/sound/fsl,imx-audio-tlv320aic3x.txt | 27 ++++
sound/soc/fsl/Kconfig | 13 ++
sound/soc/fsl/Makefile | 2 +
sound/soc/fsl/imx-tlv320aic3x.c | 177 +++++++++++++++++++++
4 files changed, 219 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/fsl,imx-audio-tlv320aic3x.txt
create mode 100644 sound/soc/fsl/imx-tlv320aic3x.c
Is it possible to use the simple-card
(Documentation/devicetree/bindings/sound/simple-card.txt) instead of
adding a new audio card driver? There are also DT bindings for the imx
audiomultiplexer (imx-audmux.txt).
I don't know why my mutt doesn't display this mail.
Anyway, if Simple Card supports audmux, yes, it's also a good idea.
Simple Card doesn't support it. But there are DT bindings for the audmux
device node which allow the definition of a default multiplexer setup.
That configuration is applied in the probe() function of the audmux driver.
Best regards,
Markus
Yes, I've checked - it can be implemented with simple card +
audmux configuration. Thanks for great suggestion. It will be
done in next patchset version.
Best regards,
Lavnikevich Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
